banner_page

VIPER27LD

16 Terminations8.5V~23.5V 16 Pin VIPER27 AC to DC power converterVIPer? plus Series 1 Outputs60kHz


  • Manufacturer: STMicroelectronics
  • Nocochips NO: 761-VIPER27LD
  • Package: 16-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 555
  • Description: 16 Terminations8.5V~23.5V 16 Pin VIPER27 AC to DC power converterVIPer? plus Series 1 Outputs60kHz (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 7 months ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-SOIC (0.154, 3.90mm Width)
Number of Pins 16
Operating Temperature -40°C~150°C TJ
Packaging Tube
Series VIPer™ plus
JESD-609 Code e4
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 16
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Switching Regulator or Controllers
Power Rating 20W
Max Power Dissipation 24W
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Base Part Number VIPER27
Pin Count 16
Number of Outputs 1
Operating Supply Voltage 23.5V
Input Voltage-Nom 14V
Analog IC - Other Type SWITCHING CONTROLLER
Operating Supply Current 900μA
Output Current 1A
Voltage - Supply (Vcc/Vdd) 8.5V~23.5V
Max Supply Current 3.5mA
Topology Flyback
Min Input Voltage 85V
Control Mode CURRENT-MODE
Frequency - Switching 60kHz
Max Input Voltage 265V
Control Technique PULSE WIDTH MODULATION
Nominal Input Voltage 265V
Switcher Configuration SINGLE
Internal Switch(s) Yes
Fault Protection Current Limiting, Over Temperature, Over Voltage
Max Duty Cycle 80 %
Output Isolation Isolated
Voltage - Breakdown 800V
Voltage - Start Up 14V
Min Input Voltage (AC) 85V
Max Input Voltage (AC) 265V
Height 1.5mm
Length 10mm
Width 4mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

VIPER27LD Overview


16-SOIC (0.154, 3.90mm Width) is the package in which the ac to dc converter is embedded.The ac dc converter is available in Tube case.There is a AC/DC converter mounted in the way of Surface Mount .It is recommended that the ac dc converter be operated at a temperature of -40°C~150°C TJ °C in order to achieve its full performance.This AC DC converter employs SWITCHING CONTROLLER analog IC type.At this point, the switching frequency reaches 60kHz .This AC/DC converter is suitable for operation in the range of 8.5V~23.5V supply voltage (Vcc/Vdd).Total terminations are 16 .The ac/dc converter has a total of 16 pins.A total of 16 pins are present on the ac-dc converter.The ac dc converters are suitable for mounting by Surface Mount .It belongs to a manufacturer family of VIPer? plus .It is possible to search for similar acdc converters by using the VIPER27 family.The number of outputs to run is 1 .Switching Regulator or Controllers includes the ac to dc conversions.We are setting the output current to 1A .You can read the standard for REACH SVHC at: No SVHC .There is a possibility of powering the AC to DC converter under a voltage of 265V .An input voltage of less than 85V V is required to operate the AC to DC inverter.When the supply voltage is 23.5V , the interface IC conducts.AC to DC converter can handle a maximum supply current of 3.5mA .The AC to DC power converter's input voltage (AC) should be below 265V .

VIPER27LD Features


Packaged with 16-SOIC (0.154, 3.90mm Width)
Switching Frequency at 60kHz
With 16 pins
Output Current at 1A
Operating Supply Voltage at the range of 23.5V

VIPER27LD Applications


There are a lot of STMicroelectronics VIPER27LD AC DC Converters applications.

  • Appliance Power Supplies
  • AC?DC USB chargers for Cameras
  • Lighting controls
  • Standby Power Supplies
  • Consumer electronics
  • Humidifier
  • Adaptors for Portable Media Player
  • Rice Cooker
  • AC?DC USB chargers for Tablets
  • Cleaners

Write a review

Note: HTML is not translated!
    Bad           Good