banner_page

VIPER27LN

7 Terminations8.5V~23.5V 7 Pin VIPER27 AC to DC power converterVIPer? plus Series 1 Outputs60kHz


  • Manufacturer: STMicroelectronics
  • Nocochips NO: 761-VIPER27LN
  • Package: 8-DIP (0.300, 7.62mm), 7 Leads
  • Datasheet: PDF
  • Stock: 812
  • Description: 7 Terminations8.5V~23.5V 7 Pin VIPER27 AC to DC power converterVIPer? plus Series 1 Outputs60kHz (Kg)

Details

Tags

Parameters
Analog IC - Other Type SWITCHING CONTROLLER
Operating Supply Current 25mA
Voltage - Supply (Vcc/Vdd) 8.5V~23.5V
Max Supply Current 3.5mA
Topology Flyback
Min Input Voltage 85V
Control Mode CURRENT-MODE
Frequency - Switching 60kHz
Max Input Voltage 265V
Control Technique PULSE WIDTH MODULATION
Nominal Input Voltage 265V
Switcher Configuration SINGLE
Internal Switch(s) Yes
Fault Protection Current Limiting, Over Temperature, Over Voltage
Max Duty Cycle 80 %
Output Isolation Isolated
Voltage - Start Up 14V
Height 3.3mm
Length 9.27mm
Width 7.11mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 7 months ago)
Mount Through Hole
Mounting Type Through Hole
Package / Case 8-DIP (0.300, 7.62mm), 7 Leads
Number of Pins 7
Weight 850.995985mg
Operating Temperature -40°C~150°C TJ
Packaging Tube
Series VIPer™ plus
JESD-609 Code e3
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 7
ECCN Code EAR99
Terminal Finish Matte Tin (Sn) - annealed
Power (Watts) 20W
Subcategory Switching Regulator or Controllers
Power Rating 20W
Max Power Dissipation 24W
Terminal Position DUAL
Number of Functions 1
Terminal Pitch 2.54mm
Base Part Number VIPER27
Pin Count 7
Number of Outputs 1
Output Voltage 800V
Input Voltage-Nom 14V

VIPER27LN Overview


8-DIP (0.300, 7.62mm), 7 Leads is the package in which the ac to dc converter is embedded.The ac dc converter is available in Tube case.The AC/DC converter is mounted in the way of Through Hole .This ac dc converter should be operated at a temperature of -40°C~150°C TJ °C so that it can deliver its performance.An analog IC of type SWITCHING CONTROLLER is employed in this AC DC converter.Switching frequency reaches 60kHz Hz.It can be used within the range of 8.5V~23.5V supply voltage (Vcc/Vdd).There are a total of 7 terminations.The ac/dc converter has a total of 7 pins.There are 7 pins in the ac-dc converter.Suitable mounting is provided by Through Hole .This AC to DC converter belongs to the VIPer? plus family of manufacturers.Search similar acdc converters based on VIPER27 family members.A total of 1 outputs are to be processed.There are a ac to dc conversions included in Switching Regulator or Controllers .The voltage output by this AC/DC converter is 800V .In the following link, you will find the REACH SVHC standard: No SVHC .Input voltage for the AC to DC converter is available under 265V .An input voltage of less than 85V volts is acceptable for use with this AC to DC inverter.AC to DC converter is capable of handling a maximum supply current of 3.5mA A.

VIPER27LN Features


Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 60kHz
With 7 pins

VIPER27LN Applications


There are a lot of STMicroelectronics VIPER27LN AC DC Converters applications.

  • Adapter for ADSL
  • Humidifier
  • AC/DC Adaptors/Chargers for Cordless Phone
  • Battery chargers for mobile devices with touchpad display
  • Adaptors for DSCs
  • Automotive Clusters
  • Switching AC-DC Adapter
  • Cleaners
  • Chargers for cell/cordless phones
  • Home Appliance Applications

Write a review

Note: HTML is not translated!
    Bad           Good