banner_page

VIPER28HD

16 Terminations8.5V~23.5V 16 Pin VIPER28 AC to DC power converterVIPer? plus Series 1 Outputs115kHz


  • Manufacturer: STMicroelectronics
  • Nocochips NO: 761-VIPER28HD
  • Package: 16-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 567
  • Description: 16 Terminations8.5V~23.5V 16 Pin VIPER28 AC to DC power converterVIPer? plus Series 1 Outputs115kHz (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 6 months ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-SOIC (0.154, 3.90mm Width)
Number of Pins 16
Operating Temperature -40°C~150°C TJ
Packaging Tube
Series VIPer™ plus
JESD-609 Code e4
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 16
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Power (Watts) 16W
Subcategory Switching Regulator or Controllers
Max Power Dissipation 16W
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Base Part Number VIPER28
Pin Count 16
Number of Outputs 1
Output Voltage 800V
Input Voltage-Nom 14V
Analog IC - Other Type SWITCHING CONTROLLER
Nominal Supply Current 2.5mA
Output Current 1.2A
Voltage - Supply (Vcc/Vdd) 8.5V~23.5V
Output Power 20W
Input Voltage (Min) 8.5V
Topology Flyback
Control Mode CURRENT-MODE
Frequency - Switching 115kHz
Input Voltage (Max) 23.5V
Control Technique PULSE WIDTH MODULATION
Switcher Configuration SINGLE
Internal Switch(s) Yes
Fault Protection Current Limiting, Over Temperature, Over Voltage, Short Circuit
Max Duty Cycle 80 %
Output Isolation Isolated
Voltage - Start Up 14V
Length 10mm
Width 3.9mm
Radiation Hardening No
RoHS Status ROHS3 Compliant

VIPER28HD Overview


In the package 16-SOIC (0.154, 3.90mm Width) , the ac to dc converter is embedded.The AC/DC power converter Tube is available for this product.A AC/DC converter of this type is mounted in the way of Surface Mount .For the ac dc converter to perform properly, it should be operated at a temperature of -40°C~150°C TJ °C.Analog IC type SWITCHING CONTROLLER is utilized in this AC DC converter.Switching frequency reaches 115kHz Hz.A range of 8.5V~23.5V supply voltages (Vcc/Vdd) can be used.As a result, it has had 16 terminations.The ac/dc converter has a total of 16 pins.There are 16 pins on the ac-dc converter.Surface Mount is the recommended mounting method for the ac dc converters.It belongs to the manufacturer family of VIPer? plus .Similar acdc converters can be found using the VIPER28 family.AC to DC converter is necessary to run 1 outputs.The ac to dc conversions are included in Switching Regulator or Controllers .In this AC to DC transformer, the output current is set to 1.2A .There is 800V voltage output from it.The input voltage with the maximal value of 23.5V can be ensured on the basis of unique technique.In the AC to DC transformer of a coverter, the output power is 20W .

VIPER28HD Features


Packaged with 16-SOIC (0.154, 3.90mm Width)
Switching Frequency at 115kHz
With 16 pins
Output Current at 1.2A

VIPER28HD Applications


There are a lot of STMicroelectronics VIPER28HD AC DC Converters applications.

  • LED Driver
  • Standby power supplies for VCR
  • Adaptors for DSCs
  • Adapters
  • Laptops and personal digital assistants
  • Standby Power Supply
  • Portable Apparatus
  • Standby and Auxiliary Power Supplies
  • Home Appliance Applications
  • Low power ac?dc Adapters for Chargers

Write a review

Note: HTML is not translated!
    Bad           Good