VIPER28HN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 weeks ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Number of Pins | 7 |
| Weight | 850.995985mg |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | VIPer™ plus |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Power (Watts) | 16W |
| Subcategory | Switching Regulator or Controllers |
| Power Rating | 20W |
| Max Power Dissipation | 20W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Base Part Number | VIPER28 |
| Pin Count | 7 |
| Number of Outputs | 1 |
| Output Voltage | 800V |
| Input Voltage-Nom | 14V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 2.5mA |
| Output Current | 1.2A |
| Voltage - Supply (Vcc/Vdd) | 8.5V~23.5V |
| Max Supply Current | 3.5mA |
| Output Power | 20W |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 115kHz |
| Max Input Voltage | 265V |
| Control Technique | PULSE WIDTH MODULATION |
| Nominal Input Voltage | 265V |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Temperature, Over Voltage, Short Circuit |
| Max Duty Cycle | 80 % |
| Output Isolation | Isolated |
| Voltage - Start Up | 14V |
| Height | 3.3mm |
| Length | 9.27mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VIPER28HN Overview
It is embedded in package 8-DIP (0.300, 7.62mm), 7 Leads .In Tube case, the ac dc converter is available.It is mounted in the way of Through Hole .It is recommended that the ac dc converter be operated at a temperature of -40°C~150°C TJ °C in order to achieve its full performance.This AC DC converter employs SWITCHING CONTROLLER analog IC type.The switching frequency reaches 115kHz .The voltage range of the supply can be set to 8.5V~23.5V (Vcc/Vdd).In total, it has 7 terminations.On this ac/dc converter, there are 7 pins.In this ac-dc converter, there are 7 pins.Suitable mounting is provided by Through Hole .It belongs to a manufacturer family of VIPer? plus .If you select the VIPER28 family, you will be able to search for similar acdc converters.A total of 1 outputs need to be run.The ac to dc conversions can be found in Switching Regulator or Controllers .Current output is set to 1.2A .This AC/DC converter produces a voltage of 800V as its output.You are able to read the REACH SVHC standard at: No SVHC .It is available to power the AC to DC converter input voltage under 265V .In the AC to DC transformer of a coverter, the output power generated is 20W .It is possible to use the AC to DC inverter with an input voltage less than 85V V.Approximately 3.5mA amps of supply current can be handled by the power AC DC.
VIPER28HN Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 115kHz
With 7 pins
Output Current at 1.2A
VIPER28HN Applications
There are a lot of STMicroelectronics VIPER28HN AC DC Converters applications.
- Portable Apparatus
- White goods
- Power Adaptors
- Automotive Infotainment
- Battery Chargers
- Smartphones
- Wall switches
- SMPS house keeping power supplies
- Home appliances
- AC/DC Adaptors/Chargers for Cell Phones
