VIPER28LD
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | VIPer™ plus |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Switching Regulator or Controllers |
| Power Rating | 1.5W |
| Max Power Dissipation | 16W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 1.27mm |
| Base Part Number | VIPER28 |
| Pin Count | 16 |
| Input Voltage-Nom | 14V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Voltage - Supply (Vcc/Vdd) | 8.5V~23.5V |
| Topology | Flyback |
| Min Input Voltage | 8.5V |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 0.85A |
| Frequency - Switching | 60kHz |
| Max Input Voltage | 23.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Temperature, Over Voltage, Short Circuit |
| Duty Cycle | 80% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 800V |
| Voltage - Start Up | 14V |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
VIPER28LD Overview
There is a ac to dc converter embedded in package 16-SOIC (0.154, 3.90mm Width) .Tube case is available for the ac dc converter.In this case, the AC/DC converter is mounted in the way of Surface Mount .To deliver its performance, the ac dc converter should be operated at a temperature of -40°C~150°C TJ .A SWITCHING CONTROLLER analog integrated circuit is used in this AC DC converter.At this point, the switching frequency reaches 60kHz .This AC/DC converter is designed for use within the range of 8.5V~23.5V supply voltage (Vcc/Vdd).In total, it has 16 terminations.There are 16 pins on the ac/dc converter.In this ac-dc converter, there are 16 pins.The ac dc converters is suitable for mounting by Surface Mount .This AC to DC converter belongs to the VIPer? plus manufacturer family.The VIPER28 family allows you to search for similar acdc converters.There are a ac to dc conversions included in Switching Regulator or Controllers .Currently, the maximum current that the ac to dc inverter can take is 0.85A .This is the standard of REACH SVHC : No SVHC .An input voltage of 23.5V is available for powering the AC to DC converter.It is possible to operate the AC to DC inverter with an input voltage that is less than 8.5V V.
VIPER28LD Features
Packaged with 16-SOIC (0.154, 3.90mm Width)
Switching Frequency at 60kHz
With 16 pins
VIPER28LD Applications
There are a lot of STMicroelectronics VIPER28LD AC DC Converters applications.
- Adapters for Handheld Electronics
- Power Adaptors
- Set-top boxes
- 3.3V power supplies
- PDAs
- Power tools fast chargers with trickle and on/off
- Auxiliary Power Supply
- Open Frame Switching Power Supply
- RCC SMPS
- Cleaners
