VIPER28LDTR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPer™ plus |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Power (Watts) | 16W |
| Subcategory | Switching Regulator or Controllers |
| Power Rating | 1.5W |
| Max Power Dissipation | 20W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | VIPER28 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Voltage | 800V |
| Input Voltage-Nom | 14V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Nominal Supply Current | 2.5mA |
| Output Current | 1.2A |
| Voltage - Supply (Vcc/Vdd) | 8.5V~23.5V |
| Output Power | 20W |
| Topology | Flyback |
| Min Input Voltage | 8.5V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 60kHz |
| Max Input Voltage | 23.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Temperature, Over Voltage, Short Circuit |
| Max Duty Cycle | 80 % |
| Output Isolation | Isolated |
| Voltage - Start Up | 14V |
| Length | 10mm |
| Width | 3.9mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
VIPER28LDTR Overview
In the package 16-SOIC (0.154, 3.90mm Width) , the ac to dc converter is embedded.Tape & Reel (TR) case is available for the ac dc converter.This AC/DC converter is mounted in the way of Surface Mount .The ac dc converter should be operated at a temperature of -40°C~150°C TJ °C to deliver its optimal performance.The AC DC converter utilizes a type SWITCHING CONTROLLER analog IC.As a result, the switching frequency reaches 60kHz .It can be used within the range of 8.5V~23.5V supply voltage (Vcc/Vdd).There have been 16 terminations of this program.There are 16 pins on this ac/dc converter.There are 16 pins in the ac-dc converter.The ac dc converters are suitable for mounting by Surface Mount .The AC to DC converter belongs to the manufacturer family of VIPer? plus .Similar acdc converters can be found using the VIPER28 family.A total of 1 outputs need to be run.Switching Regulator or Controllers contains the ac to dc conversions.It has been set to 1.2A for the output current.It produces a voltage of 800V .In the following link, you will find the REACH SVHC standard: No SVHC .There is a possibility of powering the AC to DC converter under a voltage of 23.5V .20W is the output power of a coverter.It is possible to use the AC to DC inverter with an input voltage less than 8.5V V.
VIPER28LDTR Features
Packaged with 16-SOIC (0.154, 3.90mm Width)
Switching Frequency at 60kHz
With 16 pins
Output Current at 1.2A
VIPER28LDTR Applications
There are a lot of STMicroelectronics VIPER28LDTR AC DC Converters applications.
- Humidifier
- AC/DC Adaptors/Chargers for Cordless Phone
- Cleaners
- Off--line Battery Charger
- Set -Top Box (STB) Power Supply
- Shaver Charger
- MPS parts
- Z-Wave
- MP3
- Power adapters for network devices
