VIPER28LN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Surface Mount | NO |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | VIPer™ plus |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Power (Watts) | 16W |
| HTS Code | 8542.39.00.01 |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | VIPER28 |
| Pin Count | 7 |
| JESD-30 Code | R-XDIP-T7 |
| Qualification Status | Not Qualified |
| Input Voltage-Nom | 14V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Voltage - Supply (Vcc/Vdd) | 8.5V~23.5V |
| Input Voltage (Min) | 8.5V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 0.85A |
| Frequency - Switching | 60kHz |
| Input Voltage (Max) | 23.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Temperature, Over Voltage, Short Circuit |
| Duty Cycle | 80% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 800V |
| Voltage - Start Up | 14V |
| Height Seated (Max) | 5.33mm |
| Length | 9.27mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
VIPER28LN Overview
The ac to dc converter is embedded in 8-DIP (0.300, 7.62mm), 7 Leads package.In Tube AC/DC power converter, it is available.The AC/DC converter is mounted in the way of Through Hole .For the ac dc converter to perform at its best, it should be operated at a temperature of -40°C~150°C TJ °C.An analog IC of type SWITCHING CONTROLLER is employed in this AC DC converter.At this point, the switching frequency reaches 60kHz .This AC/DC converter is designed for use within the range of 8.5V~23.5V supply voltage (Vcc/Vdd).It has a total of 7 terminations.The pins of the ac-dc converter count up to 7 .It is a member of VIPer? plus manufacturer family.You can search similar acdc converters based on VIPER28 family.Switching Regulator or Controllers includes the ac to dc conversions.Using a unique technique, a voltage with a maximum value of 23.5V can be ensured.Ac to dc inverters can be powered by up to 0.85A current.
VIPER28LN Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 60kHz
VIPER28LN Applications
There are a lot of STMicroelectronics VIPER28LN AC DC Converters applications.
- Low-Voltage I/O System Power
- Low power ac?dc Adapters for Chargers
- Power Adaptors
- Set -Top Box (STB) Power Supply
- AC/DC LED Driver applications
- AC/DC Adaptors/Chargers for Cordless Phone
- ATX/BTX Auxiliary Power
- 3.3V power supplies
- Appliances
- Auxiliary Power Supplies
