banner_page

VIPER37HE

10 Terminations8.5V~23.5V 10 Pin VIPER37 AC to DC power converterVIPer? plus Series 1 Outputs115kHz


  • Manufacturer: STMicroelectronics
  • Nocochips NO: 761-VIPER37HE
  • Package: 10-SDIP (0.300, 7.62mm)
  • Datasheet: PDF
  • Stock: 696
  • Description: 10 Terminations8.5V~23.5V 10 Pin VIPER37 AC to DC power converterVIPer? plus Series 1 Outputs115kHz (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 7 months ago)
Mount Through Hole
Mounting Type Through Hole
Package / Case 10-SDIP (0.300, 7.62mm)
Number of Pins 10
Operating Temperature -40°C~150°C TJ
Packaging Tube
Series VIPer™ plus
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 10
ECCN Code EAR99
Power (Watts) 20W
Subcategory Switching Regulator or Controllers
Power Rating 25W
Max Power Dissipation 25W
Terminal Position DUAL
Base Part Number VIPER37
Number of Outputs 1
Analog IC - Other Type SWITCHING REGULATOR
Operating Supply Current 3.5mA
Voltage - Supply (Vcc/Vdd) 8.5V~23.5V
Max Supply Current 3.5mA
Output Power 25W
Topology Flyback
Min Input Voltage 85V
Control Mode CURRENT-MODE
Frequency - Switching 115kHz
Max Input Voltage 265V
Internal Switch(s) Yes
Fault Protection Current Limiting, Over Temperature, Over Voltage
Max Duty Cycle 80 %
Output Isolation Isolated
Voltage - Breakdown 800V
Voltage - Start Up 14V
Min Input Voltage (AC) 85V
Max Input Voltage (AC) 265V
Length 10.16mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

VIPER37HE Overview


In the package 10-SDIP (0.300, 7.62mm) , the ac to dc converter is embedded.The AC/DC power converter Tube is available for this product.The AC/DC converter is mounted in the way of Through Hole .It is recommended that the ac dc converter be operated at a temperature of -40°C~150°C TJ in order to ensure its performance.The AC DC converter utilizes a type SWITCHING REGULATOR analog IC.At this point, the switching frequency reaches 115kHz .A range of 8.5V~23.5V supply voltages (Vcc/Vdd) can be used.As a result, it has a total of 10 terminations.There are 10 pins on the ac/dc converter.The ac dc converters is suitable for mounting by Through Hole .This AC to DC converter belongs to the VIPer? plus family of manufacturers.You can search similar acdc converters based on VIPER37 family.In this AC to DC transformer, there are 1 outputs to run.AC to DC converter is contained in Switching Regulator or Controllers .You can read the standard of REACH SVHC : No SVHC .The AC to DC converter can be powered under 265V voltage.Coverters generate 25W in terms of output power.An input voltage of less than 85V volts can be used with the AC to DC inverter.Approximately 3.5mA amps of supply current can be handled by the power AC DC.Input voltage (AC) should be below 265V .

VIPER37HE Features


Packaged with 10-SDIP (0.300, 7.62mm)
Switching Frequency at 115kHz
With 10 pins

VIPER37HE Applications


There are a lot of STMicroelectronics VIPER37HE AC DC Converters applications.

  • Dimmers
  • Adapters for Handheld Electronics
  • Battery chargers for media tablets
  • USB type-c v1.2 chargers with optional VDM
  • AC?DC USB chargers for Cell Phones
  • 3.3V power supplies
  • Standby Power Supplies
  • Switching AC-DC Adapter
  • Lighting controls
  • Switching AC-DC Charger

Write a review

Note: HTML is not translated!
    Bad           Good