VIPER37LE
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 10-SDIP (0.300, 7.62mm) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | VIPer™ plus |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Power (Watts) | 20W |
| Subcategory | Switching Regulator or Controllers |
| Power Rating | 25W |
| Max Power Dissipation | 25W |
| Terminal Position | DUAL |
| Base Part Number | VIPER37 |
| Number of Outputs | 1 |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Operating Supply Current | 2.5mA |
| Voltage - Supply (Vcc/Vdd) | 8.5V~23.5V |
| Max Supply Current | 2.5mA |
| Output Power | 25W |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 60kHz |
| Max Input Voltage | 265V |
| Nominal Input Voltage | 265V |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Temperature, Over Voltage |
| Max Duty Cycle | 80 % |
| Output Isolation | Isolated |
| Voltage - Breakdown | 800V |
| Voltage - Start Up | 14V |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Length | 10.16mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VIPER37LE Overview
This ac to dc converter is included in the package 10-SDIP (0.300, 7.62mm) .In Tube case, the ac dc converter is available.Through Hole is mounted in the way of this AC/DC converter.This ac dc converter should be operated at a temperature of -40°C~150°C TJ °C so that it can deliver its performance.Analog ICs of type SWITCHING REGULATOR are used in this AC DC converter.Switching frequency reaches 60kHz Hz.It can be used within the range of 8.5V~23.5V supply voltage (Vcc/Vdd).Total terminations are 10 .There are 10 pins on the ac/dc converter.Through Hole are the recommended mounting method for the ac dc converters.It belongs to the family of VIPer? plus manufacturers.A similar acdc converter can be searched by using the VIPER37 family.In this AC to DC transformer, there are 1 outputs to run.AC to DC converter is contained in Switching Regulator or Controllers .You can read the standard of REACH SVHC : No SVHC .The AC to DC converter input voltage can be powered under 265V .It is assumed that a coverter generates 25W as its output power.Input voltages less than 85V volts can be used to operate the AC to DC inverter.AC to DC converter can handle a maximum supply current of 2.5mA .The AC to DC power converter's input voltage (AC) should be below 265V .
VIPER37LE Features
Packaged with 10-SDIP (0.300, 7.62mm)
Switching Frequency at 60kHz
With 10 pins
VIPER37LE Applications
There are a lot of STMicroelectronics VIPER37LE AC DC Converters applications.
- Z-Wave
- Standby Power Supply
- Standby Power Supplies
- Switching AC-DC Adapter
- Home appliances
- Standby power supplies for VCR
- IoT Applications
- Linear Adapter Replacements
- Portable audio
- Battery chargers for cellular phones
