banner_page

VIPER38LDTR

8.5V~23.5V 16 Pin VIPER38 AC to DC power converterVIPer? plus Series 60kHz


  • Manufacturer: STMicroelectronics
  • Nocochips NO: 761-VIPER38LDTR
  • Package: 16-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 893
  • Description: 8.5V~23.5V 16 Pin VIPER38 AC to DC power converterVIPer? plus Series 60kHz (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 7 months ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-SOIC (0.154, 3.90mm Width)
Number of Pins 16
Operating Temperature -40°C~150°C TJ
Packaging Tape & Reel (TR)
Series VIPer™ plus
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
ECCN Code EAR99
Power (Watts) 20W
HTS Code 8542.39.00.01
Power Rating 1.5W
Peak Reflow Temperature (Cel) NOT SPECIFIED
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Base Part Number VIPER38
Operating Supply Voltage 23.5V
Analog IC - Other Type SWITCHING CONTROLLER
Voltage - Supply (Vcc/Vdd) 8.5V~23.5V
Topology Flyback
Min Input Voltage 8.5V
Frequency - Switching 60kHz
Max Input Voltage 23.5V
Internal Switch(s) Yes
Fault Protection Current Limiting, Over Temperature, Over Voltage, Short Circuit
Max Duty Cycle 80 %
Output Isolation Isolated
Voltage - Breakdown 800V
Voltage - Start Up 14V
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant

VIPER38LDTR Overview


There is a ac to dc converter embedded in package 16-SOIC (0.154, 3.90mm Width) .The ac dc converter is available in Tape & Reel (TR) case.Surface Mount mounts this AC/DC converter.For the ac dc converter to perform properly, it should be operated at a temperature of -40°C~150°C TJ °C.This AC DC converter employs SWITCHING CONTROLLER analog IC type.There is 60kHz switching frequency.A range of 8.5V~23.5V supply voltages (Vcc/Vdd) can be used.Approximately 16 pins are present on the ac/dc converter.Surface Mount is the recommended mounting method for the ac dc converters.This AC to DC converter belongs to the VIPer? plus manufacturer family.If you select the VIPER38 family, you will be able to search similar acdc converters.You can read the standard of REACH SVHC : No SVHC .The AC to DC converter input voltage can be powered under 23.5V .The AC to DC inverter may be operated with an input voltage less than 8.5V volts.It is possible for the interface IC to conduct when the supply voltage is 23.5V .

VIPER38LDTR Features


Packaged with 16-SOIC (0.154, 3.90mm Width)
Switching Frequency at 60kHz
With 16 pins
Operating Supply Voltage at the range of 23.5V

VIPER38LDTR Applications


There are a lot of STMicroelectronics VIPER38LDTR AC DC Converters applications.

  • AC/DC Adaptors/Chargers for E-books
  • Standby power supplies for TV
  • Set -Top Box (STB) Power Supply
  • Universal input AC/DC adapters (15W - 45W)
  • Laptops
  • Power Adaptors
  • Standby Power Supplies
  • Linear Adapter Replacements
  • Adapter/Charger for Cordless Phones
  • AC--DC Adapter

Write a review

Note: HTML is not translated!
    Bad           Good