VIPER50-E
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Surface Mount |
| Package / Case | Pentawatt-5 HV (Bent and Staggered Leads) |
| Number of Pins | 5 |
| Packaging | Tube |
| Series | VIPER™ |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | 25°C |
| Power (Watts) | 50W |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 60W |
| Technology | MOS |
| Terminal Position | ZIG-ZAG |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Reach Compliance Code | not_compliant |
| Frequency | 200kHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | VIPER50 |
| Pin Count | 5 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Voltage | 620V |
| Input Voltage-Nom | 13V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Current | 1.5A |
| Voltage - Supply (Vcc/Vdd) | 8V~15V |
| Control Features | Frequency Control, Soft Start, Sync |
| Input Voltage (Min) | 9V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | Up to 200kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 50ns |
| Fall Time (Typ) | 100 ns |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Temperature |
| Output Isolation | Isolated |
| Voltage - Start Up | 11V |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VIPER50-E Overview
In the Pentawatt-5 HV (Bent and Staggered Leads) package, the ac to dc converter is embedded.The ac dc converter is available in Tube case.As you can see, this AC/DC converter is mounted in the way of Surface Mount .Analog IC type SWITCHING REGULATOR is utilized in this AC DC converter.When the switching frequency reaches Up to 200kHz , the circuit is closed.Vcc/Vdd can be used within the range of 8V~15V supply voltage.There are a total of 5 terminations.There are 5 pins on this ac/dc converter.In this ac-dc converter, there are 5 pins.The ac dc converters is suitable for mounting by Through Hole .Currently, it is acdc converter of the manufacturer family of VIPER? .If you select the VIPER50 family, you will be able to search similar acdc converters.The number of outputs to run is 1 .The ac to dc conversions are contained in Switching Regulator or Controllers .It has been set to 1.5A for the output current.This AC/DC converter produces a voltage of 620V as its output.The power AC DC is capable of high efficiency when operated at a frequency of 200kHz .When the maximum 125°C is set, the AC to DC power converter runs steadily.Temperatures below 25°C are not permitted for this isolated switch.
VIPER50-E Features
Packaged with Pentawatt-5 HV (Bent and Staggered Leads)
Switching Frequency at Up to 200kHz
With 5 pins
Output Current at 1.5A
VIPER50-E Applications
There are a lot of STMicroelectronics VIPER50-E AC DC Converters applications.
- Standby power supplies for TV
- Records
- Power tools
- Battery chargers for smart phones
- AC--DC Adapter
- AC?DC USB chargers for Cameras
- Standby Power Supplies
- AC-DC Output Power Conversion Applications
- Humidifier
- Power adapters for network devices
