VIPER50A-22-E
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Surface Mount |
| Package / Case | Pentawatt-5 HV (Bent and Staggered Leads) |
| Number of Pins | 5 |
| Packaging | Tube |
| Series | VIPER™ |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | 25°C |
| Power (Watts) | 50W |
| Additional Feature | AUTOMATIC BURST MODE OPERATION IN STAND-BY CONDITION |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 60W |
| Terminal Position | ZIG-ZAG |
| Number of Functions | 1 |
| Frequency | 200kHz |
| Base Part Number | VIPER50 |
| Pin Count | 5 |
| Number of Outputs | 1 |
| Output Voltage | 700V |
| Max Output Current | 1mA |
| Input Voltage-Nom | 13V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Current | 1.5A |
| Voltage - Supply (Vcc/Vdd) | 8V~15V |
| Max Supply Current | 16mA |
| Control Features | Frequency Control, Soft Start, Sync |
| Max Output Voltage | 700V |
| Topology | Flyback |
| Min Input Voltage | 0V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | Up to 200kHz |
| Max Input Voltage | 15V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 50ns |
| Fall Time (Typ) | 100 ns |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Temperature |
| Max Duty Cycle | 12 % |
| Output Isolation | Isolated |
| Voltage - Start Up | 11V |
| Height | 15.8mm |
| Length | 10.4mm |
| Width | 4.8mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VIPER50A-22-E Overview
In the package Pentawatt-5 HV (Bent and Staggered Leads) , the ac to dc converter is embedded.The AC/DC power converter is available in Tube .In this case, the AC/DC converter is mounted in the way of Surface Mount .The AC DC converter utilizes a type SWITCHING REGULATOR analog IC.When the switching frequency reaches Up to 200kHz , the circuit is closed.As long as the supply voltage (Vcc/Vdd) is within the range of 8V~15V , the AC/DC converter may be used.There are a total of 5 terminations.There are 5 pins on this ac/dc converter.The pins of the ac-dc converter count up to 5 .It is suitable for mounting by Through Hole .Currently, it is acdc converter of the manufacturer family of VIPER? .Similar acdc converters can be found using the VIPER50 family.The number of outputs to run is 1 .Switching Regulator or Controllers contains the ac to dc conversions.1.5A is set as the output current.As a result, its output voltage is 700V .The power AC DC is capable of high efficiency when operated at a frequency of 200kHz .This is the standard of REACH SVHC : No SVHC .There is a possibility of powering the AC to DC converter under a voltage of 15V .In addition to AUTOMATIC BURST MODE OPERATION IN STAND-BY CONDITION , this ACDC converter can also be used to determine AUTOMATIC BURST MODE OPERATION IN STAND-BY CONDITION .The AC to DC inverter can be used with an input voltage of less than 0V V.There is a maximum current limAC to DC converter of 16mA for the supply.Using 125°C as the maximum ensures that the AC to DC power converter operates in a stable manner.Temperatures below 25°C degrees Celsius are not permitted for this isolated switch.
VIPER50A-22-E Features
Packaged with Pentawatt-5 HV (Bent and Staggered Leads)
Switching Frequency at Up to 200kHz
With 5 pins
Output Current at 1.5A
VIPER50A-22-E Applications
There are a lot of STMicroelectronics VIPER50A-22-E AC DC Converters applications.
- Adapter/Charger for Cordless Phones
- Standby and Auxiliary Power Supplies Set Top Boxes (STB)
- White goods
- Wireless System
- Handheld/Battery-Powered Systems
- Adapters
- Adapter for ADSL
- AC/DC Adaptors/Chargers for PDAs
- Rice Cooker
- Standby Power Supply
