VIPER50A(022Y)
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Surface Mount |
| Package / Case | Pentawatt-5 HV (Bent and Staggered Leads) |
| Number of Pins | 5 |
| Packaging | Tube |
| Series | VIPER™ |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | 25°C |
| Power (Watts) | 50W |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 60W |
| Technology | MOS |
| Terminal Position | ZIG-ZAG |
| Number of Functions | 1 |
| Frequency | 200kHz |
| Base Part Number | VIPER50 |
| Pin Count | 5 |
| Number of Outputs | 1 |
| Output Voltage | 700V |
| Input Voltage-Nom | 13V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Current | 1.5A |
| Voltage - Supply (Vcc/Vdd) | 8V~15V |
| Quiescent Current | 12mA |
| Control Features | Frequency Control, Soft Start, Sync |
| Input Voltage (Min) | 9V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | Up to 200kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 50ns |
| Fall Time (Typ) | 100 ns |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Temperature |
| Output Isolation | Isolated |
| Voltage - Start Up | 11V |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
VIPER50A(022Y) Overview
There is a ac to dc converter embedded in package Pentawatt-5 HV (Bent and Staggered Leads) .The AC/DC power converter type is Tube .This AC/DC converter is mounted in the way of Surface Mount .Analog ICs of type SWITCHING REGULATOR are used in this AC DC converter.Up to 200kHz is the switching frequency.Within the range of 8V~15V supply voltage (Vcc/Vdd), it can be used.A total of 5 terminations have been recorded.A ac/dc converter with 5 pins is available.In this ac-dc converter, there are 5 pins.It is suitable for mounting by Through Hole .It belongs to the family of VIPER? manufacturers.Search similar acdc converters based on VIPER50 family members.The number of outputs to run is 1 .There are a ac to dc conversions included in Switching Regulator or Controllers .We have set the output current to 1.5A .Its output voltage is700V .High efficiency can be achieved when AC to DC converters frequency is set to 200kHz .When 125°C is set to the maximum, the AC to DC power converter will run continuously.Temperatures below [25°C are not allowed to be used on this isolated switch.There is no quiescent current consumption at 12mA .
VIPER50A(022Y) Features
Packaged with Pentawatt-5 HV (Bent and Staggered Leads)
Switching Frequency at Up to 200kHz
With 5 pins
Output Current at 1.5A
VIPER50A(022Y) Applications
There are a lot of STMicroelectronics VIPER50A(022Y) AC DC Converters applications.
- Power adapters for monitors
- Rice Cooker
- Battery Chargers
- Records
- Adaptors for DSCs
- Power tools
- AC/DC Adaptors/Chargers for Cell Phones
- Lighting controls
- MPS parts
- Auxiliary Power Supplies
