VIPER50SP
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSO-10 Exposed Bottom Pad |
| Number of Pins | 10 |
| Packaging | Tube |
| Series | VIPER™ |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | 25°C |
| Power (Watts) | 50W |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 60W |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Frequency | 200kHz |
| Base Part Number | VIPER50 |
| Pin Count | 10 |
| Number of Outputs | 1 |
| Input Voltage-Nom | 13V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Current | 1.5A |
| Voltage - Supply (Vcc/Vdd) | 8V~15V |
| Quiescent Current | 12mA |
| Control Features | Frequency Control, Soft Start, Sync |
| Input Voltage (Min) | 9V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | Up to 200kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 50ns |
| Fall Time (Typ) | 100 ns |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Temperature |
| Output Isolation | Isolated |
| Voltage - Breakdown | 620V |
| Voltage - Start Up | 11V |
| Height Seated (Max) | 3.75mm |
| Length | 9.4mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
VIPER50SP Overview
It is embedded in package PowerSO-10 Exposed Bottom Pad .Tube case is available for the ac dc converter.As you can see, this AC/DC converter is mounted in the way of Surface Mount .In this AC DC converter, an analog integrated circuit (IC) of type SWITCHING REGULATOR is employed.When the switching frequency reaches Up to 200kHz , the process is complete.A range of 8V~15V supply voltages (Vcc/Vdd) can be used.Total terminations are 10 .On this ac/dc converter, there are 10 pins.Up to 10 pins are present on the ac-dc converter.The ac dc converters are suitable to mount by Surface Mount .Currently, it is acdc converter of the manufacturer family of VIPER? .The VIPER50 family allows you to search for similar acdc converters.There are 1 outputs to be run.AC to DC converter is included in Switching Regulator or Controllers .We have set the output current to 1.5A .High efficiency can be achieved when AC to DC converters frequency is set to 200kHz .As long as 125°C is set to its maximum value, the AC to DC power converter will run steadily.It is necessary that the minimum working temperature of this isolated switch not fall below 25°C .Quiescent current is consumed at 12mA .
VIPER50SP Features
Packaged with PowerSO-10 Exposed Bottom Pad
Switching Frequency at Up to 200kHz
With 10 pins
Output Current at 1.5A
VIPER50SP Applications
There are a lot of STMicroelectronics VIPER50SP AC DC Converters applications.
- Chargers for cell/cordless phones
- PDAs
- USB-PD 2.0
- Replacements for bulky plug-in transformers
- Air conditioners
- DVD players
- Set Top Boxes (STB)
- Appliance Power Supplies
- LED Driver
- White goods
