banner_page

VIPER53DIP

8 Terminations8.4V~19V VIPER53 AC to DC power converterVIPER? Series 1 OutputsUp to 300kHz


  • Manufacturer: STMicroelectronics
  • Nocochips NO: 761-VIPER53DIP
  • Package: 8-DIP (0.300, 7.62mm)
  • Datasheet: PDF
  • Stock: 465
  • Description: 8 Terminations8.4V~19V VIPER53 AC to DC power converterVIPER? Series 1 OutputsUp to 300kHz (Kg)

Details

Tags

Parameters
Terminal Finish Matte Tin (Sn) - annealed
Power (Watts) 50W
Subcategory Switching Regulator or Controllers
Max Power Dissipation 30W
Terminal Position DUAL
Number of Functions 1
Terminal Pitch 2.54mm
Frequency 300kHz
Base Part Number VIPER53
Pin Count 8
JESD-30 Code R-PDIP-T8
Number of Outputs 1
Input Voltage-Nom 13V
Analog IC - Other Type SWITCHING REGULATOR
Voltage - Supply (Vcc/Vdd) 8.4V~19V
Control Features EN, Frequency Control, Soft Start
Topology Flyback
Control Mode CURRENT-MODE
Output Current-Max 2.3A
Frequency - Switching Up to 300kHz
Control Technique PULSE WIDTH MODULATION
Switcher Configuration SINGLE
Internal Switch(s) Yes
Fault Protection Current Limiting, Over Load, Over Temperature, Short Circuit
Output Isolation Isolated
Voltage - Breakdown 620V
Voltage - Start Up 11.5V
Height Seated (Max) 5.33mm
Width 7.62mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Mounting Type Through Hole
Package / Case 8-DIP (0.300, 7.62mm)
Surface Mount NO
Operating Temperature -40°C~150°C TC
Packaging Tube
Series VIPER™
JESD-609 Code e3
Part Status Obsolete
Moisture Sensitivity Level (MSL) Not Applicable
Number of Terminations 8
ECCN Code EAR99

VIPER53DIP Overview


This ac to dc converter is embedded in package 8-DIP (0.300, 7.62mm) .There is a AC/DC power converter of Tube available.It is mounted in the way of Through Hole .It is recommended that the ac dc converter be operated at a temperature of -40°C~150°C TC °C in order to achieve its full performance.A SWITCHING REGULATOR analog integrated circuit is used in this AC DC converter.There is Up to 300kHz switching frequency.Within the range of 8.4V~19V supply voltage (Vcc/Vdd), it can be used.A total of 8 terminations have been recorded.A total of 8 pins are present on the ac-dc converter.It belongs to the manufacturer family of VIPER? .Search similar acdc converters based on VIPER53 family members.AC to DC converter is necessary to run 1 outputs.There are a ac to dc conversions included in Switching Regulator or Controllers .High efficiency can be achieved when AC to DC converters frequency is set to 300kHz .Ac to dc inverters can be powered by up to 2.3A current.

VIPER53DIP Features


Packaged with 8-DIP (0.300, 7.62mm)
Switching Frequency at Up to 300kHz

VIPER53DIP Applications


There are a lot of STMicroelectronics VIPER53DIP AC DC Converters applications.

  • Home appliances
  • Adapters for Handheld Electronics
  • Low-Voltage I/O System Power
  • Battery chargers for media tablets
  • Auxiliary Power Supply
  • Standby and Auxiliary Power Supplies Set Top Boxes (STB)
  • Universal Off-Line Power Supplies
  • Automotive Telematics
  • Off--line Battery Charger
  • AC/DC Adaptors/Chargers for PDAs

Write a review

Note: HTML is not translated!
    Bad           Good