banner_page

VIPER53EDIP-E

8 Terminations8.4V~19V 8 Pin VIPER53 AC to DC power converterVIPER? Series 1 OutputsUp to 300kHz


  • Manufacturer: STMicroelectronics
  • Nocochips NO: 761-VIPER53EDIP-E
  • Package: 8-DIP (0.300, 7.62mm)
  • Datasheet: PDF
  • Stock: 181
  • Description: 8 Terminations8.4V~19V 8 Pin VIPER53 AC to DC power converterVIPER? Series 1 OutputsUp to 300kHz (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Through Hole
Mounting Type Through Hole
Package / Case 8-DIP (0.300, 7.62mm)
Number of Pins 8
Operating Temperature -40°C~150°C TC
Packaging Tube
Series VIPER™
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Terminal Finish MATTE TIN
Subcategory Switching Regulator or Controllers
Power Rating 50W
Max Power Dissipation 30W
Terminal Position DUAL
Peak Reflow Temperature (Cel) 225
Number of Functions 1
Terminal Pitch 2.54mm
Base Part Number VIPER53
Pin Count 8
Number of Outputs 1
Max Output Current 150μA
Input Voltage-Nom 13V
Voltage 19V
Analog IC - Other Type SWITCHING REGULATOR
Nominal Supply Current 9mA
Output Current 2.3A
Voltage - Supply (Vcc/Vdd) 8.4V~19V
Max Supply Current 11mA
Output Power 30W
Control Features EN, Frequency Control, Soft Start
Max Output Voltage 620V
Topology Flyback
Min Input Voltage 0V
Control Mode CURRENT-MODE
Frequency - Switching Up to 300kHz
Max Input Voltage 19V
Control Technique PULSE WIDTH MODULATION
Switcher Configuration SINGLE
Internal Switch(s) Yes
Fault Protection Current Limiting, Over Load, Over Temperature, Short Circuit
Output Isolation Isolated
Voltage - Start Up 11.5V
Min Input Voltage (AC) 195V
Max Input Voltage (AC) 265V
Height 2.92mm
Length 9.02mm
Width 7.87mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

VIPER53EDIP-E Overview


There is a ac to dc converter embedded in package 8-DIP (0.300, 7.62mm) .In Tube case, the ac dc converter is available.Through Hole mounts this AC/DC converter.Ideally, the ac dc converter should be operated at a temperature of -40°C~150°C TC degrees Celsius.This AC DC converter employs SWITCHING REGULATOR analog IC type.When the switching frequency reaches Up to 300kHz , the process is complete.As long as the supply voltage (Vcc/Vdd) is within the range of 8.4V~19V , the AC/DC converter may be used.In total, there are 8 terminations.A ac/dc converter with 8 pins is available.There are 8 pins in total.Suitable mounting is provided by Through Hole .This AC to DC converter belongs to the VIPER? manufacturer family.Similar acdc converters can be found using the VIPER53 family.Running 1 outputs is available.There are a ac to dc conversions included in Switching Regulator or Controllers .AC to DC converter is set to 2.3A for the output current.You can read the standard of REACH SVHC : No SVHC .There is an option to power the AC to DC converter input voltage under 19V .In the AC to DC transformer of a coverter, the output power generated is 30W .It is possible to operate the AC to DC inverter with an input voltage that is less than 0V V.AC to DC converter can handle a maximum supply current of 11mA .An input voltage (AC) should be applied to the AC to DC power converter that falls below 265V volts.

VIPER53EDIP-E Features


Packaged with 8-DIP (0.300, 7.62mm)
Switching Frequency at Up to 300kHz
With 8 pins
Output Current at 2.3A

VIPER53EDIP-E Applications


There are a lot of STMicroelectronics VIPER53EDIP-E AC DC Converters applications.

  • Utility meters
  • Adapters for Handheld Electronics
  • AC/DC LED Driver applications
  • Adaptors for Portable Media Player
  • Shaver Charger
  • Cleaners
  • AC/DC Adaptors/Chargers for E-books
  • Smartphones
  • Vacuum Cleaner
  • Power Adaptors

Write a review

Note: HTML is not translated!
    Bad           Good