banner_page

VIPER53ESPTR-E

10 Terminations8.4V~19V 10 Pin VIPER53 AC to DC power converterVIPER? Series 1 OutputsUp to 300kHz


  • Manufacturer: STMicroelectronics
  • Nocochips NO: 761-VIPER53ESPTR-E
  • Package: PowerSO-10 Exposed Bottom Pad
  • Datasheet: PDF
  • Stock: 814
  • Description: 10 Terminations8.4V~19V 10 Pin VIPER53 AC to DC power converterVIPER? Series 1 OutputsUp to 300kHz (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 7 months ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case PowerSO-10 Exposed Bottom Pad
Number of Pins 10
Operating Temperature -40°C~150°C TC
Packaging Tape & Reel (TR)
Series VIPER™
JESD-609 Code e3
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 10
ECCN Code EAR99
Terminal Finish Matte Tin (Sn) - annealed
Subcategory Switching Regulator or Controllers
Power Rating 65W
Max Power Dissipation 40W
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 250
Number of Functions 1
Base Part Number VIPER53
Pin Count 10
Number of Outputs 1
Input Voltage-Nom 13V
Analog IC - Other Type SWITCHING REGULATOR
Operating Supply Current 9mA
Output Current 2.3A
Voltage - Supply (Vcc/Vdd) 8.4V~19V
Max Supply Current 11mA
Quiescent Current 2mA
Output Power 40W
Control Features EN, Frequency Control, Soft Start
Topology Flyback
Min Input Voltage 195V
Control Mode CURRENT-MODE
Frequency - Switching Up to 300kHz
Max Input Voltage 265V
Control Technique PULSE WIDTH MODULATION
Switcher Configuration SINGLE
Internal Switch(s) Yes
Fault Protection Current Limiting, Over Load, Over Temperature, Short Circuit
Output Isolation Isolated
Voltage - Breakdown 620V
Voltage - Start Up 11.5V
Min Input Voltage (AC) 195V
Max Input Voltage (AC) 265V
Height Seated (Max) 3.65mm
Length 9.3mm
Width 7.4mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

VIPER53ESPTR-E Overview


In the package PowerSO-10 Exposed Bottom Pad , the ac to dc converter is embedded.Tape & Reel (TR) case is available for the ac dc converter.Surface Mount is mounted in the way of this AC/DC converter.The ac dc converter should be operated at a temperature of -40°C~150°C TC °C to deliver its optimal performance.This AC DC converter employs SWITCHING REGULATOR analog IC type.Switching frequency reaches Up to 300kHz Hz.Supply voltage (Vcc/Vdd) does not need to exceed 8.4V~19V .In total, there are 10 terminations.On this ac/dc converter, there are 10 pins.The ac-dc converter has 10 pins.Surface Mount is the recommended mounting method for the ac dc converters.Currently, it is acdc converter of the manufacturer family of VIPER? .If you select the VIPER53 family, you will be able to search similar acdc converters.There are 1 outputs to be run.There are a ac to dc conversions included in Switching Regulator or Controllers .There is 2.3A output current set.This is the standard of REACH SVHC : No SVHC .Input voltages under 265V can be used to power the AC to DC converter.The output power of a coverter is assumed to be 40W .A voltage of less than 195V V can be used with the AC to DC inverter.There is a maximum supply current of 11mA that AC to DC converter can handle.The input voltage (AC) that can be applied in the AC to DC power converter should under 265V .When the current is at 2mA , AC to DC converter consumes quiescent current.

VIPER53ESPTR-E Features


Packaged with PowerSO-10 Exposed Bottom Pad
Switching Frequency at Up to 300kHz
With 10 pins
Output Current at 2.3A

VIPER53ESPTR-E Applications


There are a lot of STMicroelectronics VIPER53ESPTR-E AC DC Converters applications.

  • White goods
  • Battery Chargers
  • Standby and Auxiliary Power Supplies
  • USB-PD 2.0
  • 3.3V power supplies
  • Laptops and personal digital assistants
  • Automotive Clusters
  • Chargers for cell/cordless phones
  • Power adapters for monitors
  • AC?DC USB chargers for Cell Phones

Write a review

Note: HTML is not translated!
    Bad           Good