VIPER53SP
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSO-10 Exposed Bottom Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~150°C TC |
| Packaging | Tube |
| Series | VIPER™ |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Power (Watts) | 65W |
| Subcategory | Switching Regulator or Controllers |
| Power Rating | 40W |
| Max Power Dissipation | 40W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Frequency | 300kHz |
| Base Part Number | VIPER53 |
| Pin Count | 10 |
| Number of Outputs | 1 |
| Output Voltage | 620V |
| Input Voltage-Nom | 13V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Nominal Supply Current | 9mA |
| Output Current | 2.3A |
| Voltage - Supply (Vcc/Vdd) | 8.4V~19V |
| Quiescent Current | 2mA |
| Output Power | 40W |
| Control Features | EN, Frequency Control, Soft Start |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | Up to 300kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Load, Over Temperature, Short Circuit |
| Output Isolation | Isolated |
| Voltage - Start Up | 11.5V |
| Height Seated (Max) | 3.65mm |
| Length | 9.4mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
VIPER53SP Overview
An embedded ac to dc converter is included in PowerSO-10 Exposed Bottom Pad package.There is a AC/DC power converter of Tube available.It is mounted in the way of Surface Mount .It is recommended that the ac dc converter be operated at a temperature of -40°C~150°C TC °C in order to achieve its full performance.An analog IC of type SWITCHING REGULATOR is employed in this AC DC converter.As a result, the switching frequency reaches Up to 300kHz .The AC/DC converter is capable of being used when the supply voltage is 8.4V~19V (Vcc/Vdd).A total of 10 terminations have been recorded.It contains 10 pins.There are 10 pins in total.The ac dc converters is suitable for mounting by Surface Mount .It belongs to a manufacturer family of VIPER? .It is possible to search for similar acdc converters by using the VIPER53 family.In this AC to DC transformer, there are 1 outputs to run.The ac to dc conversions can be found in Switching Regulator or Controllers .We have set the output current to 2.3A .Its output voltage is620V .This power AC DC is capable of reaching high efficiency when operating at a frequency of 300kHz .A coverter produces 40W watts of output power.When set to 2mA , AC to DC converter consumes quiescent current.
VIPER53SP Features
Packaged with PowerSO-10 Exposed Bottom Pad
Switching Frequency at Up to 300kHz
With 10 pins
Output Current at 2.3A
VIPER53SP Applications
There are a lot of STMicroelectronics VIPER53SP AC DC Converters applications.
- Appliance Power Supplies
- Home Appliance Applications
- ATX/BTX Auxiliary Power
- Linear Adapter Replacements
- AC?DC USB chargers for Tablets
- Shaver Charger
- Adaptors for Portable Media Player
- Replacements for bulky plug-in transformers
- LED Driver
- Adapters for Handheld Electronics
