VIPER53SP-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSO-10 Exposed Bottom Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~150°C TC |
| Packaging | Tube |
| Series | VIPER™ |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Power (Watts) | 65W |
| Subcategory | Switching Regulator or Controllers |
| Power Rating | 40W |
| Max Power Dissipation | 40W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | VIPER53 |
| Pin Count | 10 |
| Max Output Current | 150μA |
| Input Voltage-Nom | 13V |
| Number of Channels | 1 |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Nominal Supply Current | 9mA |
| Output Current | 1.6A |
| Voltage - Supply (Vcc/Vdd) | 8.4V~19V |
| Output Power | 40W |
| Control Features | EN, Frequency Control, Soft Start |
| Max Output Voltage | 620V |
| Topology | Flyback |
| Min Input Voltage | 0V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | Up to 300kHz |
| Max Input Voltage | 19V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Load, Over Temperature, Short Circuit |
| Output Isolation | Isolated |
| Voltage - Start Up | 11.5V |
| Height | 3.65mm |
| Length | 9.6mm |
| Width | 9.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
VIPER53SP-E Overview
In the package PowerSO-10 Exposed Bottom Pad , the ac to dc converter is embedded.You can get it in AC/DC power converter Tube .It is mounted in the way of Surface Mount .This ac dc converter should be operated at a temperature of -40°C~150°C TC °C so that it can deliver its performance.The AC DC converter utilizes a type SWITCHING REGULATOR analog IC.In this AC to DC transformer, the switching frequency is Up to 300kHz .It can be used within the range of 8.4V~19V supply voltage (Vcc/Vdd).There have been 10 terminations of this program.On this ac/dc converter, there are 10 pins.There are 10 pins in the ac-dc converter.There are no problem mounting the ac dc converters by Surface Mount .A member of the VIPER? manufacturer family, it has the following characteristics.The VIPER53 family allows you to search for similar acdc converters.Switching Regulator or Controllers contains the ac to dc conversions.Current output is set to 1.6A .There is a possibility of powering the AC to DC converter under a voltage of 19V .In the AC to DC transformer of a coverter, the output power generated is 40W .The AC to DC inverter can be used with an input voltage of less than 0V V.1 channels are currently available.
VIPER53SP-E Features
Packaged with PowerSO-10 Exposed Bottom Pad
Switching Frequency at Up to 300kHz
With 10 pins
Output Current at 1.6A
With 1 channels on it
VIPER53SP-E Applications
There are a lot of STMicroelectronics VIPER53SP-E AC DC Converters applications.
- Handheld/Battery-Powered Systems
- Air Conditioning
- PDAs
- Charger
- Battery chargers for cordless
- Power Adaptors
- Cleaners
- Linear Adapter Replacements
- Battery Chargers
- Adapter/Charger for Cordless Phones
