VIPER53SPTR-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSO-10 Exposed Bottom Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~150°C TC |
| Packaging | Tape & Reel (TR) |
| Series | VIPER™ |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Switching Regulator or Controllers |
| Power Rating | 65W |
| Max Power Dissipation | 40W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | VIPER53 |
| Pin Count | 10 |
| Input Voltage-Nom | 13V |
| Number of Channels | 1 |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Operating Supply Current | 9mA |
| Nominal Supply Current | 9mA |
| Output Current | 1.6A |
| Voltage - Supply (Vcc/Vdd) | 8.4V~19V |
| Max Supply Current | 11mA |
| Output Power | 40W |
| Control Features | EN, Frequency Control, Soft Start |
| Topology | Flyback |
| Min Input Voltage | 195V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | Up to 300kHz |
| Max Input Voltage | 265V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Load, Over Temperature, Short Circuit |
| Output Isolation | Isolated |
| Voltage - Breakdown | 620V |
| Voltage - Start Up | 11.5V |
| Min Input Voltage (AC) | 195V |
| Max Input Voltage (AC) | 265V |
| Height Seated (Max) | 3.65mm |
| Length | 9.4mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VIPER53SPTR-E Overview
In the PowerSO-10 Exposed Bottom Pad package, the ac to dc converter is embedded.The AC/DC power converter type is Tape & Reel (TR) .A AC/DC converter of this type is mounted in the way of Surface Mount .Ideally, the ac dc converter should be operated at a temperature of -40°C~150°C TC degrees Celsius.An analog IC of type SWITCHING REGULATOR is employed in this AC DC converter.When the switching frequency reaches Up to 300kHz , the process is complete.The AC/DC converter is capable of being used when the supply voltage is 8.4V~19V (Vcc/Vdd).In total, it has 10 terminations.On this ac/dc converter, there are 10 pins.There are 10 pins in the ac-dc converter.Surface Mount are the recommended mounting method for the ac dc converters.It belongs to the family of VIPER? manufacturers.You can search similar acdc converters based on VIPER53 family.The following ac to dc conversions are contained in Switching Regulator or Controllers .In this AC to DC transformer, the output current is set to 1.6A .It is possible to read the REACH SVHC standard at: No SVHC .The AC to DC converter can be powered from the input voltage under 265V .The output power of a coverter is assumed to be 40W .An input voltage of less than 195V volts is acceptable for use with this AC to DC inverter.AC to DC converter is capable of handling a maximum supply current of 11mA A.The input voltage (AC) that can be applied in the AC to DC power converter should under 265V .1 channels are currently available.
VIPER53SPTR-E Features
Packaged with PowerSO-10 Exposed Bottom Pad
Switching Frequency at Up to 300kHz
With 10 pins
Output Current at 1.6A
With 1 channels on it
VIPER53SPTR-E Applications
There are a lot of STMicroelectronics VIPER53SPTR-E AC DC Converters applications.
- LED Driver
- Portable Apparatus
- Industrial controls
- Standby Power for General Off-Line Applications
- AC/DC Adaptors/Chargers for PDAs
- Standby and Auxiliary Power Supplies
- USB type-c v1.2 chargers with optional VDM
- Auxiliary Power Supplies
- Laptops and personal digital assistants
- IoT Applications
