VN02H
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | Pentawatt-5 (Vertical, Bent and Staggered Leads) |
| Number of Pins | 5 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Resistance | 350mOhm |
| Terminal Finish | MATTE TIN |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 28W |
| Terminal Position | ZIG-ZAG |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | VN02 |
| Pin Count | 5 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 6A |
| Operating Supply Voltage | 36V |
| Interface | On/Off |
| Nominal Supply Current | 50μA |
| Output Configuration | High Side |
| Power Dissipation | 28W |
| Output Current | 6A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 20mA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 5V |
| Max Input Voltage | 36V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5V~36V |
| Driver Number of Bits | 1 |
| Fault Protection | Open Load Detect, Over Temperature |
| Turn On Time | 20 μs |
| Output Peak Current Limit-Nom | 0.9A |
| Rds On (Typ) | 400m Ω (Max) |
| Turn Off Time | 30 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
VN02H Overview
It is package in Tube case.This file is included in package Pentawatt-5 (Vertical, Bent and Staggered Leads).The LED driver is mounted as Through Hole.There is a General Purpose switch type associated with it.To ensure reliable operation, the temperature should be set to -40°C~150°C TJ.It is possible to use 1 outputs in the lighting driver.It uses a supply voltage of Not Required to operate.There is a maximum output voltage of N-Channel volts.A lighting driver with Status Flag features is available.This object belongs to the VN02 family.As a result, there are 5 terminations.For operation, 5 pins are used.There are 1 functions of the LED driver.The maximum output current drops to 6A in order to meet the operation criteria.Through Hole is mounted in the way of this lighting driver.The LED driving board is equipped with a total of 5 pins.350mOhm is the resistance of the lighting driver.The output current is set to 6A in this case.The LED driver is self-contained in an econtainer with Peripheral Drivers capacity.The supply voltage should be set at 36V for best efficiency.Its maximum input voltage is 36V volts.As a minimum input voltage, it requires 5V volts.This system has a maximum current requirement of 20mA.
VN02H Features
Resistance of 350mOhm
VN02H Applications
There are a lot of STMicroelectronics VN02H Power Switches ICs applications.
- USB3.1 Power Delivery
- Low Voltage I/O System Power
- PC Card Hot Swap
- Set-top-box
- Portable GPS Device
- Hot Swap
- Portable/Handheld Devices
- Smart Phones, Feature Phones
- Hard Disk Drives
- Mobile Communication Devices
