VN02H-E
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | Pentawatt-5 (Vertical, Bent and Staggered Leads) |
| Number of Pins | 5 |
| Supplier Device Package | 5-PENTAWATT |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Feature | Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Resistance | 350mOhm |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 28W |
| Base Part Number | VN02 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 6A |
| Operating Supply Voltage | 36V |
| Interface | On/Off |
| Current - Output (Max) | 6A |
| Nominal Supply Current | 50μA |
| Output Configuration | High Side |
| Power Dissipation | 28W |
| Output Current | 6A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 50μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 5V |
| Max Input Voltage | 36V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5V~36V |
| Fault Protection | Open Load Detect, Over Temperature |
| Rds On (Typ) | 400mOhm (Max) |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
VN02H-E Overview
It is packaged in the manner of a Tube.There is a Pentawatt-5 (Vertical, Bent and Staggered Leads) package that includes it.Through Hole is the mounting type of the LED driver.General Purpose is the switch type that it owns.To ensure reliable operation, set the temperature to -40°C~150°C TJ.In this LED driver, there are no outputs available.It uses a supply voltage of Not Required to operate.There is a maximum output voltage of N-Channel volts on this LED driver.The lighting driver has Status Flag features.It is part of the VN02 family of LED drivers.During operation, the 5 pins are used.This lighting driver is capable of delivering a maximum output of 6A volts.The maximum output current is reduced to 6A to meet the operation criteria.The lighting driver is mounted in the way of Through Hole.There is 350mOhm resistance on the LED driver.This case has the output current set to 6A.A supply voltage of 36V is recommended for maximum efficiency.As far as input voltage goes, its maximum is 36V volts.Input voltage must be at least 5V volts.In order to ensure stable operation, a maximum operating temperature of 150°C°C should be maintained.Ensure reliability by operating at a minimum temperature of -40°C degrees Celsius.For its operation, a current of 50μA is required.
VN02H-E Features
Resistance of 350mOhm
VN02H-E Applications
There are a lot of STMicroelectronics VN02H-E Power Switches ICs applications.
- Notebook PC
- Mobile Communication Devices
- HDD and SSD
- Storage Drives
- Gaming
- Solid State Drivers
- Hot Swap
- Wireless Headsets
- Handheld Devices
- Notebook and Tablet Computers
