VN02H(011Y)
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | Pentawatt-5 (Horizontal, Bent and Staggered Leads) |
| Number of Pins | 5 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Resistance | 800mOhm |
| Terminal Finish | MATTE TIN |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 28W |
| Terminal Position | ZIG-ZAG |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Base Part Number | VN02 |
| Pin Count | 5 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 6A |
| Operating Supply Voltage | 36V |
| Interface | On/Off |
| Nominal Supply Current | 50μA |
| Output Configuration | High Side |
| Power Dissipation | 28W |
| Output Current | 6A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 20mA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 5V |
| Max Input Voltage | 36V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5V~36V |
| Driver Number of Bits | 1 |
| Fault Protection | Open Load Detect, Over Temperature |
| Turn On Time | 20 µs |
| Output Peak Current Limit-Nom | 0.9A |
| Rds On (Typ) | 400m Ω (Max) |
| Turn Off Time | 30 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
VN02H(011Y) Overview
It is packaged in the form of a Tube.It is included with the Pentawatt-5 (Horizontal, Bent and Staggered Leads) package as well.The lighting driver is mounted in the Through Hole position.It owns General Purpose switch type.Ensure reliable operation by setting the temperature to -40°C~150°C TJ.The LED driver has a total of 1 outputs.The LED driving board operates at Not Required volts.A maximum output voltage of N-Channel volts can be obtained with this LED driver.The lighting driver has Status Flag features.It belongs to the family VN02.In total, there are 5 terminations.The operation is performed through the 5 pins.As far as the lighting driver is concerned, there are 1 functions.As a result, the maximum output current is reduced to 6A in order to meet the operation requirements.Using a voltage of 13V allows for high efficiency.Through Hole is mounted in the way.5 pins are equipped with it.It has a resistance of 800mOhm.The output current is set to 6A in this case.Self-contained LED driver with Peripheral Drivers capacity in an econtainer.It is recommended to set the supply voltage to 36V for optimum efficiency.The maximum input voltage of the LED driver is 36V volts.The minimum input voltage is 5V volts.It has a maximum current requirement of 20mA.
VN02H(011Y) Features
Supplied from 13V
Resistance of 800mOhm
VN02H(011Y) Applications
There are a lot of STMicroelectronics VN02H(011Y) Power Switches ICs applications.
- HDD, SSD
- Mobile Communication Devices
- Solid State Drivers
- Hot Swap
- PDAs
- Hot-Swap Systems
- Smart Phones, Feature Phones
- Various applications equipped with buttons
- Storage Drives
- Smartphone and PDA
