VN02H(012Y)
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | Pentawatt-5 (Straight Leads, Staggered Depth) |
| Number of Pins | 5 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Resistance | 800mOhm |
| Terminal Finish | MATTE TIN |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 28W |
| Terminal Position | SINGLE |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | VN02 |
| Pin Count | 5 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 6A |
| Operating Supply Voltage | 36V |
| Interface | On/Off |
| Nominal Supply Current | 50μA |
| Output Configuration | High Side |
| Power Dissipation | 28W |
| Output Current | 6A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 50μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 5V |
| Max Input Voltage | 36V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5V~36V |
| Driver Number of Bits | 1 |
| Fault Protection | Open Load Detect, Over Temperature |
| Turn On Time | 20 μs |
| Output Peak Current Limit-Nom | 0.9A |
| Rds On (Typ) | 400m Ω (Max) |
| Turn Off Time | 30 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| RoHS Status | ROHS3 Compliant |
VN02H(012Y) Overview
It's?packaged?in?the way?of?a?Tube.Package Pentawatt-5 (Straight Leads, Staggered Depth) contains it.This lighting drivere has a mounting type of Through Hole.The switch type of this switch is General Purpose.It is recommended that the temperature be set to -40°C~150°C TJ for reliable performance.By default, it is set to output 1.The LED driving board is powered by a voltage of Not Required.Voltage output is N-Channel volts at maximum.It has a total of Status Flag features.It is a member of the VN02 family.There are 5 terminations in it.5 pins are used for operation.It consists of 1 functions.As a result, the maximum output current is reduced to 6A in order to meet the operation requirements.High efficiency is possible at 13V supply voltage.The LED driving board is mounted in the way of Through Hole.There are 5 pins in total on this board.It has a resistance of 800mOhm.It is set to 6A in this case.This LED driver is self-contained in an econtainer with a capacity of Peripheral Drivers.It is recommended to set the supply voltage to 36V for optimum efficiency.As far as input voltage goes, its maximum is 36V volts.As far as input voltage goes, it has a minimum of 5V volts.For its operation, a maximum current requirement of 50μA is required.
VN02H(012Y) Features
Supplied from 13V
Resistance of 800mOhm
VN02H(012Y) Applications
There are a lot of STMicroelectronics VN02H(012Y) Power Switches ICs applications.
- Handheld Devices
- Solid-State Drives
- Wireless Headsets
- PC Card Hot Swap
- Smartphone and PDA
- Hard Disk Drives
- Gaming
- Portable GPS Device
- Portable GPS
- Storage (HDDs, SSDs)
