VN02HSP
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSO-10 Exposed Bottom Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 29W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Base Part Number | VN02 |
| Pin Count | 10 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 6A |
| Operating Supply Voltage | 60V |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 9/36V |
| Interface | On/Off |
| Nominal Supply Current | 20mA |
| Output Configuration | High Side |
| Power Dissipation | 29W |
| Output Current | 6A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5V~36V |
| Driver Number of Bits | 1 |
| Fault Protection | Open Load Detect, Over Temperature |
| Turn On Time | 20 μs |
| Output Peak Current Limit-Nom | 0.9A |
| Rds On (Typ) | 400m Ω (Max) |
| Turn Off Time | 30 μs |
| Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 3.75mm |
| Length | 9.4mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
VN02HSP Overview
Tube is how it's packaged.This file is included in package PowerSO-10 Exposed Bottom Pad.The lighting driver is mounted in the Surface Mount position.The switch type of this switch is General Purpose.To ensure reliable operation, the temperature should be set to -40°C~150°C TJ.It is possible to use 1 outputs in the lighting driver.In order to operate, it requires a voltage supply of Not Required.The maximum output voltage is N-Channel volts.In terms of features, the LED driving board has Status Flag.The VN02 family consists of this type.A total of 10 terminations have been found in it.In order to operate, the 10 pins are used.It has 1 functions.To comply with the operation criteria, the maximum output current is reduced to 6A.The lighting driver is mounted in the way of Surface Mount.In total, it has 10 pins.When this is the case, the output current is set to 6A.This LED driver is self-contained in an econtainer with a capacity of Peripheral Drivers.The maximum supply voltage for this lighting driver is set to 36V (Vsup).In this case, the power supply is 9/36V.A supply voltage of 60V is recommended for maximum efficiency.
VN02HSP Features
VN02HSP Applications
There are a lot of STMicroelectronics VN02HSP Power Switches ICs applications.
- PC Cards
- USB Power Distribution
- Set-top-box
- HDD and SSD
- USB Ports/Hubs
- Solid State Drivers
- Storage (HDDs, SSDs)
- Portable GPS Device
- Various applications equipped with buttons
- Portable Music Players
