VN02HSP13TR
| Parameters | |
|---|---|
| Power Dissipation | 29W |
| Output Current | 6A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 20mA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 5V |
| Max Input Voltage | 36V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5V~36V |
| Driver Number of Bits | 1 |
| Fault Protection | Open Load Detect, Over Temperature |
| Turn On Time | 20 μs |
| Output Peak Current Limit-Nom | 0.9A |
| Rds On (Typ) | 400m Ω (Max) |
| Turn Off Time | 30 μs |
| Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 3.75mm |
| Length | 9.4mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSO-10 Exposed Bottom Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Resistance | 350mOhm |
| Terminal Finish | Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 29W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Base Part Number | VN02 |
| Pin Count | 10 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 6A |
| Operating Supply Voltage | 36V |
| Interface | On/Off |
| Nominal Supply Current | 20mA |
| Output Configuration | High Side |
VN02HSP13TR Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).The PowerSO-10 Exposed Bottom Pad package contains it.This lighting drivere has a mounting type of Surface Mount.The switch type of this switch is General Purpose.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.By default, it is set to output 1.The LED driving board operates at Not Required volts.There is a maximum output voltage of N-Channel volts on this LED driver.Currently, the LED driving board is equipped with Status Flag features.It is part of the VN02 family of LED drivers.It contains 10 terminations.The operation is carried out using the 10 pins.It consists of 1 functions.It is necessary to reduce the maximum output current to 6A to meet the operation criteria.In this case, it is mounted in the way of Surface Mount.A total of 10 pins are present on it.It has 350mOhm resistance.In this case, the output current will be set to 6A.Self-contained LED driver with Peripheral Drivers capacity in an econtainer.The supply voltage should be set at 36V for best efficiency.Its maximum input voltage is 36V volts.Input voltage must be at least 5V volts.For its operation, a maximum current requirement of 20mA is required.
VN02HSP13TR Features
Resistance of 350mOhm
VN02HSP13TR Applications
There are a lot of STMicroelectronics VN02HSP13TR Power Switches ICs applications.
- Portable Devices
- Solid State Drivers
- PC Card Hot Swap
- HDD and SSD
- Hard Disk Drives
- USB Protection
- USB3.1 Power Delivery
- PDAs
- Portable Video Game Players
- Gaming
