VN02HSPTR-E
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSO-10 Exposed Bottom Pad |
| Number of Pins | 10 |
| Supplier Device Package | 10-PowerSO |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Feature | Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 29W |
| Base Part Number | VN02 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 6A |
| Interface | On/Off |
| Current - Output (Max) | 6A |
| Nominal Supply Current | 20mA |
| Output Configuration | High Side |
| Power Dissipation | 29W |
| Output Current | 6A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5V~36V |
| Fault Protection | Open Load Detect, Over Temperature |
| Rds On (Typ) | 400mOhm (Max) |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
VN02HSPTR-E Overview
Tape & Reel (TR) is the way it's packaged.There is a PowerSO-10 Exposed Bottom Pad package that includes it.It has been mounted as Surface Mount on the LED driver.It owns the General Purpose switch type.Keeping the temperature at -40°C~150°C TJ ensures reliable operation.The LED driver has 1 outputs.The LED driving board is powered by a voltage of Not Required.A maximum output voltage of N-Channel volts can be achieved by this LED driver.It is equipped with Status Flag features.There is a VN02 family of things that it belongs to.The operation is carried out using the 10 pins.The maximum output of the LED driving board is 6AV.To comply with the operation criteria, the maximum output current is reduced to 6A.The lighting driver is mounted in the direction of Surface Mount.When this case is used, the output current is set to 6A.In order to ensure stable operation, a maximum operating temperature of 150°C°C should be maintained.The LED driver must work at a minimum temperature of -40°C degrees Celsius in order to remain reliable.
VN02HSPTR-E Features
VN02HSPTR-E Applications
There are a lot of STMicroelectronics VN02HSPTR-E Power Switches ICs applications.
- Hot-Swap Systems
- Wireless/Networking Cards
- Set-Top Boxes
- Wireless Headsets
- Hot Swap
- Wireless Modem Data Cards
- Set-top-box
- USB Power Distribution
- PDAs
- Portable Music Players
