VN02N
| Parameters | |
|---|---|
| Max Power Dissipation | 29W |
| Terminal Position | ZIG-ZAG |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | VN02 |
| Pin Count | 5 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 6A |
| Operating Supply Voltage | 26V |
| Interface | On/Off |
| Nominal Supply Current | 15mA |
| Output Configuration | High Side |
| Power Dissipation | 29W |
| Output Current | 6A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 15mA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 7V |
| Max Input Voltage | 26V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 7V~26V |
| Driver Number of Bits | 1 |
| Fault Protection | Open Load Detect, Over Temperature |
| Output Peak Current Limit-Nom | 0.9A |
| Rds On (Typ) | 400m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| RoHS Status | Non-RoHS Compliant |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | Pentawatt-5 (Vertical, Bent and Staggered Leads) |
| Number of Pins | 5 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Resistance | 400mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Peripheral Drivers |
VN02N Overview
Tube is how it's packaged.This file is included in package Pentawatt-5 (Vertical, Bent and Staggered Leads).The lighting driver is mounted in the Through Hole position.There is a switch type of General Purpose.Ensure reliable operation by setting the temperature to -40°C~150°C TJ.The lighting driver is equipped with 1 outputs that can be used.A voltage of Not Required is used to power it.The maximum output voltage of this LED driver is N-Channel volts.It has a total of Status Flag features.There is a VN02 family of things that it belongs to.In total, there are 5 terminations.For operation, 5 pins are used.As far as the lighting driver is concerned, there are 1 functions.To meet the operation criteria, the maximum output current drops to 6A.It is possible to obtain high efficiency with a supply voltage of 13V.It is mounted in the way of Through Hole.This LED driver is equipped with a total of 5 pins.The LED driver has 400mOhm resistance.The output current is set to 6A in this case.Self-contained in an econtainer with a capacity of Peripheral Drivers, this LED driver is self-contained.It is recommended to set the supply voltage to 26V for optimum efficiency.The maximum input voltage is 26V volts.A voltage of 7V volts is the minimum input voltage.The maximum current required for its operation is 15mA.
VN02N Features
Supplied from 13V
Resistance of 400mOhm
VN02N Applications
There are a lot of STMicroelectronics VN02N Power Switches ICs applications.
- PC Cards
- Handheld Devices
- Mobile Communication Devices
- Hot Swap
- Storage (HDDs, SSDs)
- Telecom and Network Systems
- Portable Music Players
- Various applications equipped with buttons
- Notebook PC
- HDD and SSD
