Parameters |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
Pentawatt-5 (Vertical, Bent and Staggered Leads) |
Number of Pins |
5 |
Supplier Device Package |
5-PENTAWATT |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tube |
Feature |
Status Flag |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
Not Applicable |
Resistance |
400mOhm |
Max Operating Temperature |
150°C |
Min Operating Temperature |
-40°C |
Max Power Dissipation |
29W |
Base Part Number |
VN02 |
Number of Outputs |
1 |
Output Type |
N-Channel |
Max Output Current |
6A |
Operating Supply Voltage |
26V |
Interface |
On/Off |
Current - Output (Max) |
6A |
Nominal Supply Current |
15mA |
Output Configuration |
High Side |
Power Dissipation |
29W |
Output Current |
6A |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Max Supply Current |
15mA |
Input Type |
Non-Inverting |
Switch Type |
General Purpose |
Min Input Voltage |
7V |
Max Input Voltage |
26V |
Ratio - Input:Output |
1:1 |
Voltage - Load |
7V~26V |
Fault Protection |
Open Load Detect, Over Temperature |
Rds On (Typ) |
400mOhm (Max) |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
VN02N-E Overview
It is packaged in the manner of a Tube.The Pentawatt-5 (Vertical, Bent and Staggered Leads) package includes it.Through Hole is the mounting type of the LED driver.There is a switch type of General Purpose.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.By default, it is set to output 1.Operation is based on a supply voltage of Not Required.It produces a maximum output voltage of N-Channel volts at its maximum output.It is equipped with Status Flag features.There is a VN02 family of things that it belongs to.During operation, the 5 pins are used.In this case, the LED driving board can produce only 6AV as its maximum output.As a result, the maximum output current is reduced to 6A in order to meet the operation requirements.Through Hole is mounted in the way of this LED driving board.The LED driver has 400mOhm resistance.This results in a 6A output current.When using this LED driving board, it is recommended that the supply voltage is set to 26V.The maximum input voltage is 26V volts.Input voltage must be at least 7V volts.A maximum operating temperature of 150°C°C is required for stable operation.The LED driver must work at a minimum temperature of -40°C degrees Celsius in order to remain reliable.The maximum current required for its operation is 15mA.
VN02N-E Features
Resistance of 400mOhm
VN02N-E Applications
There are a lot of STMicroelectronics VN02N-E Power Switches ICs applications.
- Smartphone and PDA
- USB Protection
- Wireless Modem Data Cards
- Portable Video Game Players
- Gaming
- USB3.1 Power Delivery
- Hot Swaps
- USB Ports/Hubs
- Wireless Headsets
- Telecom and Network Systems