VN02N(011Y)
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | Pentawatt-5 (Horizontal, Bent and Staggered Leads) |
| Number of Pins | 5 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Feature | Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Resistance | 400mOhm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 29W |
| Terminal Position | ZIG-ZAG |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | VN02 |
| Pin Count | 5 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 6A |
| Operating Supply Voltage | 26V |
| Interface | On/Off |
| Nominal Supply Current | 15mA |
| Output Configuration | High Side |
| Power Dissipation | 29W |
| Output Current | 6A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 15mA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 7V |
| Max Input Voltage | 26V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 7V~26V |
| Driver Number of Bits | 1 |
| Fault Protection | Open Load Detect, Over Temperature |
| Output Peak Current Limit-Nom | 0.9A |
| Rds On (Typ) | 400m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| RoHS Status | ROHS3 Compliant |
VN02N(011Y) Overview
Tube is the way it's packaged.There is a package for it in the Pentawatt-5 (Horizontal, Bent and Staggered Leads) package.This LED driving board is mounted using the mounting type Through Hole.General Purpose is the switch type it owns.It is best to set the temperature to -40°C~150°C TJ to ensure reliable operation.In this LED driver, there are no outputs available.Operation is based on a supply voltage of Not Required.The maximum output voltage is N-Channel volts.This LED driving board is equipped with Status Flag features in order for it to be useful.It belongs to the family VN02.A total of 5 terminations have been recorded.For operation, we use the 5 pins.The LED driving board has a total of 1 functions.It is necessary to reduce the maximum output current to 6A to meet the operation criteria.The supply voltage can be 13V for high efficiency.Through Hole is mounted in the way of this LED driving board.A total of 5 pins are present on it.400mOhm resistance is present in the lighting driver.This results in a 6A output current.The LED driver is packaged in an econtainer with a capacity of Peripheral Drivers.In order to achieve the best efficiency, the supply voltage should be set to 26V.This LED driver can handle voltages up to 26V volts.The input voltage minimum is 7V volts.There is a maximum current requirement of 15mA for its operation.
VN02N(011Y) Features
Supplied from 13V
Resistance of 400mOhm
VN02N(011Y) Applications
There are a lot of STMicroelectronics VN02N(011Y) Power Switches ICs applications.
- Notebook and Tablet Computers
- Portable GPS Device
- Wearable Devices
- USB Power Distribution
- Low Voltage I/O System Power
- Hot Swaps
- Smartphone and PDA
- PDAs
- Hard Disk Drives
- Hot-Swap Systems
