VN02N(012Y)
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | Pentawatt-5 (Straight Leads, Staggered Depth) |
| Number of Pins | 5 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Feature | Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Resistance | 400mOhm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 29W |
| Terminal Position | SINGLE |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | VN02 |
| Pin Count | 5 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 6A |
| Operating Supply Voltage | 26V |
| Interface | On/Off |
| Nominal Supply Current | 15mA |
| Output Configuration | High Side |
| Power Dissipation | 29W |
| Output Current | 6A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 15mA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 7V |
| Max Input Voltage | 26V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 7V~26V |
| Driver Number of Bits | 1 |
| Fault Protection | Open Load Detect, Over Temperature |
| Output Peak Current Limit-Nom | 0.9A |
| Rds On (Typ) | 400m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| RoHS Status | ROHS3 Compliant |
VN02N(012Y) Overview
The package is in the form of a Tube.There is a package for it in the Pentawatt-5 (Straight Leads, Staggered Depth) package.This LED driving board is mounted using the mounting type Through Hole.General Purpose is the switch type that it owns.The temperature should be set to -40°C~150°C TJ to ensure reliable functioning.The LED driver has a total of 1 outputs.Operation is based on Not Required supply voltage.The maximum output voltage is N-Channel volts.A lighting driver with Status Flag features is available.It is part of the VN02 family of LED drivers.In total, there are 5 terminations.5 pins are used for operation.It is important to note that the LED driving board has 1 functions.As a result, the maximum output current is reduced to 6A in order to meet the operation requirements.The supply voltage can be 13V for high efficiency.It is mounted in the way of Through Hole.5 pins are equipped with it.It has a resistance of 400mOhm.When this is the case, the output current is set to 6A.There is a Peripheral Drivers capacity container for this LED driver that is self-contained.In order to maximize efficiency, the supply voltage should be set to 26V.Voltage input is limited to 26V volts.There is a minimum input voltage of 7V volts.For its operation, a current of 15mA is required.
VN02N(012Y) Features
Supplied from 13V
Resistance of 400mOhm
VN02N(012Y) Applications
There are a lot of STMicroelectronics VN02N(012Y) Power Switches ICs applications.
- Portable/Handheld Devices
- Storage (HDDs, SSDs)
- Handheld Devices
- Gaming
- Portable GPS
- Set-Top Boxes
- USB Ports/Hubs
- Telecom and Network Systems
- USB Power Distribution
- Various applications equipped with buttons
