VN02NSP
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSO-10 Exposed Bottom Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Resistance | 400mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 58W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Base Part Number | VN02 |
| Pin Count | 10 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 6A |
| Operating Supply Voltage | 26V |
| Interface | On/Off |
| Nominal Supply Current | 15mA |
| Output Configuration | High Side |
| Power Dissipation | 58W |
| Output Current | 6A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 50mA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 7V |
| Max Input Voltage | 26V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 7V~26V |
| Driver Number of Bits | 1 |
| Fault Protection | Open Load Detect, Over Temperature |
| Output Peak Current Limit-Nom | 6A |
| Rds On (Typ) | 400m Ω (Max) |
| Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 3.75mm |
| Length | 9.4mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
VN02NSP Overview
The LED driver's packaged as a Tube.It is included in the package PowerSO-10 Exposed Bottom Pad.A Surface Mount mounting is used for the LED driving board.A General Purpose switch type is owned by it.It is recommended that the temperature be set to -40°C~150°C TJ for reliable performance.The lighting driver is equipped with 1 outputs that can be used.It uses a supply voltage of Not Required to operate.There is a maximum output voltage of N-Channel volts.This LED driving board is equipped with Status Flag features in order for it to be useful.It is a member of the VN02 family.A total of 10 terminations can be found in it.The 10 pins are used for the operation of the system.It is important to note that the LED driving board has 1 functions.The maximum output current drops to 6A in order to meet the operation criteria.The supply voltage of 13V is conducive to high efficiency.Surface Mount is mounted in the way of this LED driving board.It is equipped with a total of 10 pins.In this LED driving board, there is 400mOhm resistance.This case results in a 6A output current.A container with a capacity of Peripheral Drivers contains this self-contained lighting driver.In order to achieve the best efficiency, the supply voltage should be set to 26V.The maximum input voltage of the LED driver is 26V volts.As far as input voltage goes, it has a minimum of 7V volts.The maximum current required for its operation is 50mA.
VN02NSP Features
Supplied from 13V
Resistance of 400mOhm
VN02NSP Applications
There are a lot of STMicroelectronics VN02NSP Power Switches ICs applications.
- Portable/Handheld Devices
- Hot-Swap Systems
- Hard Disk Drives
- USB3.1 Power Delivery
- USB Protection
- Portable Music Players
- HDD, SSD
- Wireless Headsets
- HDD and SSD
- Storage (HDDs, SSDs)
