VN02NSP-E
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSO-10 Exposed Bottom Pad |
| Number of Pins | 10 |
| Supplier Device Package | 10-PowerSO |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Feature | Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 400mOhm |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 58W |
| Base Part Number | VN02 |
| Number of Outputs | 1 |
| Output Voltage | 60V |
| Output Type | N-Channel |
| Max Output Current | 6A |
| Interface | On/Off |
| Max Supply Voltage | 26V |
| Min Supply Voltage | 7V |
| Current - Output (Max) | 6A |
| Nominal Supply Current | 15mA |
| Output Configuration | High Side |
| Power Dissipation | 58W |
| Output Current | 6A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 15mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 10 μs |
| Switch Type | General Purpose |
| Min Input Voltage | 7V |
| Max Input Voltage | 26V |
| Turn-Off Delay Time | 15 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 7V~26V |
| Fault Protection | Open Load Detect, Over Temperature |
| Rds On (Typ) | 400mOhm (Max) |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
VN02NSP-E Overview
A Tube is used to package it.This file is included in package PowerSO-10 Exposed Bottom Pad.This LED driving board is mounted using the mounting type Surface Mount.The switch type of this switch is General Purpose.To ensure reliable operation, the temperature should be set to -40°C~150°C TJ.In this LED driver, there are no outputs available.The LED driving board is powered by a voltage of Not Required.There is a maximum output voltage of N-Channel volts on this LED driver.This LED driving board is equipped with Status Flag features in order for it to be useful.I believe it belongs to the VN02 family.The operation is carried out using the 10 pins.6AV is the maximum output of the LED driver.This results in the maximum output current dropping to 6A to meet the operation criteria.As a result, it is mounted in the manner of Surface Mount.Currently, the LED driving board has a resistance of 400mOhm ohms.When this case is used, the output current is set to 6A.Its maximum input voltage is 26V volts.A minimum input voltage of 7V volts is required for this LED driver.It is suitable for stable operation to operate at a maximum temperature of 150°C°C.Reliability is ensured by operating at a minimum working temperature of -40°C degrees Celsius.It requires 15mA current to operate.It can handle a maximum voltage of 26VV.If required, it can operate at 7V volts as well.
VN02NSP-E Features
Resistance of 400mOhm
VN02NSP-E Applications
There are a lot of STMicroelectronics VN02NSP-E Power Switches ICs applications.
- USB Power Distribution
- Handheld Devices
- Solid State Drivers
- Notebook PC
- Smart Phones, Feature Phones
- Wireless/Networking Cards
- Wireless Modem Data Cards
- Portable Music Players
- Portable Devices
- USB Protection
