VN02NSP13TR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSO-10 Exposed Bottom Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Resistance | 400mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 58W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Current Rating | 6A |
| Base Part Number | VN02 |
| Pin Count | 10 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 6A |
| Operating Supply Voltage | 26V |
| Interface | On/Off |
| Nominal Supply Current | 15mA |
| Output Configuration | High Side |
| Power Dissipation | 58W |
| Output Current | 6A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 50mA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 7V |
| Max Input Voltage | 26V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 7V~26V |
| Driver Number of Bits | 1 |
| Fault Protection | Open Load Detect, Over Temperature |
| Rds On (Typ) | 400m Ω (Max) |
| Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 3.75mm |
| Length | 9.4mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
VN02NSP13TR Overview
As a result, it is packaged in the form of a Tape & Reel (TR).Package PowerSO-10 Exposed Bottom Pad contains it.This lighting drivere has a mounting type of Surface Mount.The switch type of this switch is General Purpose.In order to guarantee reliable performance, the temperature should be set to -40°C~150°C TJ.There are 1 outputs available on this lighting driver.A voltage of Not Required is used to power it.Voltage output is N-Channel volts at maximum.Features of the lighting driver are Status Flag.It belongs to the VN02 family.In total, there are 10 terminations.During operation, the 10 pins are used.Currently, there are 1 functions associated with the lighting driver.This operation requires the maximum output current to be decreased to 6A.It is possible to achieve a high level of efficiency with a supply voltage of 13V.Surface Mount is mounted in the way.This LED driver is equipped with a total of 10 pins.400mOhm is the resistance of the lighting driver.The output current is set to 6A in this case.A self-contained econtainer holding Peripheral Drivers capacity contains this lighting driver.In order to optimize the efficiency of the supply voltage, it should be set to 26V.This LED driving board can accept voltages up to 26V volts as an input.A voltage of 7V volts is the minimum input voltage.It requires a maximum current requirement of 50mA.
VN02NSP13TR Features
Supplied from 13V
Resistance of 400mOhm
VN02NSP13TR Applications
There are a lot of STMicroelectronics VN02NSP13TR Power Switches ICs applications.
- Notebook and Tablet Computers
- Storage Drives
- Solid State Drivers
- Gaming
- Telecom and Network Systems
- Wireless Headsets
- HDD, SSD
- Set-top-box
- Portable Music Players
- USB Power Distribution
