VN03SP
| Parameters | |
|---|---|
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Resistance | 500mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 14W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Base Part Number | VN03 |
| Pin Count | 10 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 9A |
| Operating Supply Voltage | 26V |
| Interface | On/Off |
| Nominal Supply Current | 50μA |
| Output Configuration | High Side |
| Power Dissipation | 14W |
| Output Current | 4A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 50μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 5.5V |
| Max Input Voltage | 26V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~26V |
| Driver Number of Bits | 1 |
| Fault Protection | Open Load Detect, Over Temperature |
| Output Peak Current Limit-Nom | 0.9A |
| Rds On (Typ) | 500m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 3.75mm |
| Length | 9.4mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSO-10 Exposed Bottom Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
VN03SP Overview
A Tube is used to package it.It is included in the package PowerSO-10 Exposed Bottom Pad.In this case, the LED driving board is mounted as Surface Mount.It owns the General Purpose switch type.It is best to set the temperature to -40°C~150°C TJ to ensure reliable operation.It is possible to use 1 outputs in the lighting driver.The LED driving board operates with a supply voltage of Not Required.It produces a maximum output voltage of N-Channel volts at its maximum output.Currently, the LED driving board is equipped with Status Flag features.I believe it belongs to the VN03 family.A total of 10 terminations have been found in it.The operation is performed through the 10 pins.Currently, there are 1 functions associated with the lighting driver.The maximum output current must drop to 9A to meet the operation criteria.High efficiency is possible at 13V supply voltage.It is positioned in the direction of Surface Mount.The LED driver has a total of 10 pins.500mOhm is the resistance of the lighting driver.This case results in a 4A output current.A self-contained econtainer holding Peripheral Drivers capacity contains this lighting driver.Optimal efficiency requires a voltage of 26V.Input voltage is limited to 26V volts.A voltage of 5.5V volts is the minimum input voltage.It requires 50μA current to operate.
VN03SP Features
Supplied from 13V
Resistance of 500mOhm
VN03SP Applications
There are a lot of STMicroelectronics VN03SP Power Switches ICs applications.
- USB3.1 Power Delivery
- Portable GPS
- Notebook and Tablet Computers
- PC Cards
- USB Power Distribution
- Solid-State Drives
- Hot Swap
- HDD and SSD
- PDAs
- USB Ports/Hubs
