VN03SP13TR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSO-10 Exposed Bottom Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Feature | Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Max Power Dissipation | 14W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Base Part Number | VN03 |
| Pin Count | 10 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 9A |
| Supply Voltage-Max (Vsup) | 26V |
| Supply Voltage-Min (Vsup) | 5.5V |
| Interface | On/Off |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~26V |
| Fault Protection | Open Load Detect, Over Temperature |
| Output Peak Current Limit-Nom | 0.9A |
| Rds On (Typ) | 500m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE SINK |
| Height Seated (Max) | 3.75mm |
| Length | 9.4mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
VN03SP13TR Overview
Tape & Reel (TR) is the way it's packaged.It is included with the PowerSO-10 Exposed Bottom Pad package as well.Mounting type Surface Mount is selected for the LED driving board.The switch type is General Purpose.Ensure reliable operation by setting the temperature to -40°C~150°C TJ.The LED driver has 1 outputs.The LED driving board operates at Not Required volts.A maximum voltage of N-Channel volts is available from the output of this LED driver.Currently, the LED driving board is equipped with Status Flag features.The VN03 family consists of this type.There are 10 terminations in it.During operation, the 10 pins are used.It is important to note that the LED driving board has 1 functions.To comply with the operation criteria, the maximum output current is reduced to 9A.The supply voltage of 13V is conducive to high efficiency.It is mounted in the way of Surface Mount.In total, it has 10 pins.This LED driver is configured to have a maximum supply voltage of 26V (Vsup).To maintain a normal operation, the supply voltage (Vsup) must be maintained above 5.5V.
VN03SP13TR Features
Supplied from 13V
VN03SP13TR Applications
There are a lot of STMicroelectronics VN03SP13TR Power Switches ICs applications.
- Wireless Modem Data Cards
- USB Protection
- Smartphone and PDA
- Wireless Headsets
- Solid-State Drives
- Low Voltage I/O System Power
- Notebook PC
- Hot Swaps
- USB Power Distribution
- Portable GPS
