VN05N
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | Pentawatt-5 (Vertical, Bent and Staggered Leads) |
| Number of Pins | 5 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 56W |
| Terminal Position | ZIG-ZAG |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | VN05 |
| Pin Count | 5 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 13A |
| Supply Voltage-Max (Vsup) | 26V |
| Supply Voltage-Min (Vsup) | 7V |
| Interface | On/Off |
| Nominal Supply Current | 15mA |
| Output Configuration | High Side |
| Power Dissipation | 56W |
| Output Current | 13A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 7V~26V |
| Driver Number of Bits | 1 |
| Fault Protection | Open Load Detect, Over Temperature |
| Output Peak Current Limit-Nom | 1.4A |
| Rds On (Typ) | 180m Ω (Max) |
| Drain to Source Resistance | 360mOhm |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| RoHS Status | ROHS3 Compliant |
VN05N Overview
Tube is how it's packaged.It's included in the Pentawatt-5 (Vertical, Bent and Staggered Leads) package.The lighting driver is mounted in the Through Hole position.General Purpose is the type of switch owned by it.It is best to set the temperature to -40°C~150°C TJ to ensure reliable operation.The LED driver is equipped with 1 outputs.Operation is based on Not Required supply voltage.A maximum output voltage of N-Channel volts can be achieved by this LED driver.The lighting driver has Status Flag features.It is a member of the VN05 family.It contains 5 terminations.5 pins are used for operation.Currently, there are 1 functions associated with the lighting driver.The maximum output current must drop to 13A to meet the operation criteria.As long as the supply voltage is 13V, high efficiency can be achieved.In this case, it is mounted in the way of Through Hole.A total of 5 pins are present on it.When this case is used, the output current is set to 13A.A self-contained econtainer holding Peripheral Drivers capacity contains this lighting driver.The maximum supply voltage for this LED driver is 26V (Vsup).Normal operation requires a voltage above 7V for the supply voltage.
VN05N Features
Supplied from 13V
VN05N Applications
There are a lot of STMicroelectronics VN05N Power Switches ICs applications.
- Portable Video Game Players
- Handheld Devices
- Smartphone and PDA
- Hard Disk Drives
- Telecom and Network Systems
- Notebook and Tablet Computers
- HDD, SSD
- Portable GPS Device
- Smart Phones, Feature Phones
- Gaming
