VN05N-E
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | Pentawatt-5 (Vertical, Bent and Staggered Leads) |
| Number of Pins | 5 |
| Supplier Device Package | 5-PENTAWATT |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Feature | Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 56W |
| Base Part Number | VN05 |
| Number of Outputs | 1 |
| Output Voltage | 60V |
| Output Type | N-Channel |
| Max Output Current | 13A |
| Interface | On/Off |
| Max Supply Voltage | 26V |
| Min Supply Voltage | 7V |
| Current - Output (Max) | 13A |
| Nominal Supply Current | 15mA |
| Output Configuration | High Side |
| Power Dissipation | 56W |
| Output Current | 13A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 7V~26V |
| Fault Protection | Open Load Detect, Over Temperature |
| Rds On (Typ) | 180mOhm (Max) |
| Height | 9.2mm |
| Length | 10.4mm |
| Width | 4.8mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
VN05N-E Overview
A Tube is used to package it.This file is included in package Pentawatt-5 (Vertical, Bent and Staggered Leads).Mounting type Through Hole is selected for the LED driving board.General Purpose is the type of switch owned by it.The temperature should be set to -40°C~150°C TJ to ensure reliable functioning.There are 1 outputs available on this lighting driver.The LED driving board operates at Not Required volts.There is a maximum output voltage of N-Channel volts on this LED driver.Features of the lighting driver are Status Flag.The VN05 family consists of this type.It is necessary to use the 5 pins in order to operate the LED driver.In terms of output, the lighting driver can provide a maximum of 13A V.In order to meet the operation criteria, the maximum output current drops to 13A.The lighting driver is mounted in the direction of Through Hole.When this is the case, the output current is set to 13A.It is recommended that the maximum operating temperature be 150°C°C to ensure stable operation.In order to ensure reliability, it must operate at a minimum temperature of -40°C degrees Celsius.26VV is the maximum supply voltage it can handle.It can work with as low a supply voltage as feasible, such as 7VV.
VN05N-E Features
VN05N-E Applications
There are a lot of STMicroelectronics VN05N-E Power Switches ICs applications.
- Hot-Swap Systems
- Wireless Headsets
- Storage (HDDs, SSDs)
- Hot Swap
- USB Protection
- HDD and SSD
- Telecom and Network Systems
- Portable GPS
- Wearable Devices
- Smartphone and PDA
