VN06
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | Pentawatt-5 (Vertical, Bent and Staggered Leads) |
| Number of Pins | 5 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Resistance | 360mOhm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 27W |
| Terminal Position | ZIG-ZAG |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | VN06 |
| Pin Count | 5 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 1.9A |
| Operating Supply Voltage | 26V |
| Interface | On/Off |
| Nominal Supply Current | 50μA |
| Output Configuration | High Side |
| Power Dissipation | 27W |
| Output Current | 9A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 50mA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 5.5V |
| Max Input Voltage | 26V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~26V |
| Driver Number of Bits | 1 |
| Fault Protection | Open Load Detect, Over Temperature |
| Output Peak Current Limit-Nom | 1.4A |
| Rds On (Typ) | 180m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| RoHS Status | ROHS3 Compliant |
VN06 Overview
It's?packaged?in?the way?of?a?Tube.The Pentawatt-5 (Vertical, Bent and Staggered Leads) package contains it.It has been mounted as Through Hole on the LED driver.There is a switch type of General Purpose.Ensure reliable operation by setting the temperature to -40°C~150°C TJ.The LED driver is equipped with 1 outputs.Operation is based on a supply voltage of Not Required.A maximum output voltage of N-Channel volts has been specified.This LED driving board is equipped with Status Flag features in order for it to be useful.The VN06 family contains this object.It has a total of 5 terminations.In order to operate, the 5 pins are used.It is important to note that the LED driving board has 1 functions.In order to meet the operation criteria, the maximum output current drops to 1.9A.As long as the supply voltage is 13V, high efficiency can be achieved.In this case, it is mounted in the way of Through Hole.It is equipped with a total of 5 pins.360mOhm resistance is present in the lighting driver.In this case, the output current will be set to 9A.There is a Peripheral Drivers capacity container for this LED driver that is self-contained.It is recommended to set the supply voltage to 26V for optimum efficiency.The maximum input voltage of the LED driver is 26V volts.As far as input voltage goes, it has a minimum of 5.5V volts.The maximum current required for its operation is 50mA.
VN06 Features
Supplied from 13V
Resistance of 360mOhm
VN06 Applications
There are a lot of STMicroelectronics VN06 Power Switches ICs applications.
- Smart Phones, Feature Phones
- Notebook and Tablet Computers
- Hot Swaps
- Wireless/Networking Cards
- USB Ports/Hubs
- Hot-Swap Systems
- Smartphone and PDA
- USB Power Distribution
- Solid-State Drives
- Portable Music Players
