VN06-E
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | Pentawatt-5 (Vertical, Bent and Staggered Leads) |
| Number of Pins | 5 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Resistance | 360mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 27W |
| Terminal Position | ZIG-ZAG |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 13V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | VN06 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 9A |
| Operating Supply Voltage | 26V |
| Interface | On/Off |
| Nominal Supply Current | 50μA |
| Output Configuration | High Side |
| Power Dissipation | 27W |
| Output Current | 9A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 50μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 5.5V |
| Max Input Voltage | 26V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~26V |
| Driver Number of Bits | 1 |
| Fault Protection | Open Load Detect, Over Temperature |
| Rds On (Typ) | 180m Ω |
| RoHS Status | ROHS3 Compliant |
VN06-E Overview
The package is in the form of a Tube.There is a Pentawatt-5 (Vertical, Bent and Staggered Leads) package that includes it.In this case, the LED driving board is mounted as Through Hole.The switch type of this switch is General Purpose.To ensure reliable operation, the temperature should be set to -40°C~150°C TJ.The LED driver has 1 outputs.With a supply voltage of Not Required, the LED driving board operates.A maximum output voltage of N-Channel volts can be obtained with this LED driver.It is equipped with Status Flag features.As you can see, it comes from the VN06 family.In total, there are 5 terminations.For operation, we use the 5 pins.It is necessary to reduce the maximum output current to 9A to meet the operation criteria.A supply voltage of 13V leads to high efficiency.Through Hole is mounted in the way of this lighting driver.In this case, there is 360mOhm resistance in the LED driving board.This case has the output current set to 9A.A self-contained econtainer holding Peripheral Drivers capacity contains this lighting driver.In order to maximize efficiency, the supply voltage should be set at 26V.There is a maximum input voltage of 26V volts.A minimum input voltage of 5.5V volts is required for this LED driver.50μA is the maximum current required to operate it.
VN06-E Features
Supplied from 13V
Resistance of 360mOhm
VN06-E Applications
There are a lot of STMicroelectronics VN06-E Power Switches ICs applications.
- USB Protection
- PC Card Hot Swap
- USB Power Distribution
- HDD, SSD
- HDD and SSD
- Portable Music Players
- Solid-State Drives
- Hot-Swap Systems
- PDAs
- Hard Disk Drives
