VN06(011Y)
| Parameters | |
|---|---|
| Voltage - Load | 5.5V~26V |
| Driver Number of Bits | 1 |
| Fault Protection | Open Load Detect, Over Temperature |
| Output Peak Current Limit-Nom | 1.4A |
| Rds On (Typ) | 180m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | Pentawatt-5 (Horizontal, Bent and Staggered Leads) |
| Number of Pins | 5 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Feature | Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Resistance | 360mOhm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 27W |
| Terminal Position | ZIG-ZAG |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Base Part Number | VN06 |
| Pin Count | 5 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 9A |
| Operating Supply Voltage | 26V |
| Interface | On/Off |
| Nominal Supply Current | 50μA |
| Output Configuration | High Side |
| Power Dissipation | 27W |
| Output Current | 9A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 50mA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 5.5V |
| Max Input Voltage | 26V |
| Ratio - Input:Output | 1:1 |
VN06(011Y) Overview
It is packaged in the form of a Tube.This package is included in Pentawatt-5 (Horizontal, Bent and Staggered Leads).Mounting type Through Hole is selected for the LED driving board.A General Purpose switch type is owned by it.Keeping the temperature at -40°C~150°C TJ ensures reliable operation.As a default, the output is set to 1.The LED driving board operates with a supply voltage of Not Required.There is a maximum output voltage of N-Channel volts.Status Flag features are available on the lighting driver.There is a VN06 family of things that it belongs to.It contains 5 terminations.During operation, the 5 pins are used.It contains 1 functions.The maximum output current drops to 9A in order to meet the operation criteria.With a supply voltage of 13V, high efficiency is possible.The lighting driver is mounted in the direction of Through Hole.As a result, it has a total of 5 pins.There is 360mOhm resistance on the LED driver.The output current is set to 9A in this case.This LED driver is self-contained in an econtainer with a capacity of Peripheral Drivers.It is recommended to set the supply voltage to 26V for optimum efficiency.As far as input voltage goes, its maximum is 26V volts.It requires 5.5V volts as the minimum input voltage.A maximum current requirement of 50mA is required for its operation.
VN06(011Y) Features
Supplied from 13V
Resistance of 360mOhm
VN06(011Y) Applications
There are a lot of STMicroelectronics VN06(011Y) Power Switches ICs applications.
- USB Protection
- Handheld Devices
- USB Power Distribution
- Gaming
- PC Card Hot Swap
- Portable GPS
- Notebook PC
- USB3.1 Power Delivery
- Solid-State Drives
- Wireless Modem Data Cards
