banner_page

VN06(012Y)

N-Channel PMIC VN06 5 Pin 13V Pentawatt-5 (Straight Leads, Staggered Depth)


  • Manufacturer: STMicroelectronics
  • Nocochips NO: 761-VN06(012Y)
  • Package: Pentawatt-5 (Straight Leads, Staggered Depth)
  • Datasheet: PDF
  • Stock: 556
  • Description: N-Channel PMIC VN06 5 Pin 13V Pentawatt-5 (Straight Leads, Staggered Depth) (Kg)

Details

Tags

Parameters
Mount Through Hole
Mounting Type Through Hole
Package / Case Pentawatt-5 (Straight Leads, Staggered Depth)
Number of Pins 5
Operating Temperature -40°C~150°C TJ
Packaging Tube
JESD-609 Code e3
Feature Status Flag
Pbfree Code yes
Part Status Obsolete
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 5
ECCN Code EAR99
Resistance 360mOhm
Terminal Finish Matte Tin (Sn)
Subcategory Peripheral Drivers
Max Power Dissipation 27W
Terminal Position SINGLE
Number of Functions 1
Supply Voltage 13V
Base Part Number VN06
Pin Count 5
Number of Outputs 1
Output Type N-Channel
Max Output Current 9A
Operating Supply Voltage 26V
Interface On/Off
Nominal Supply Current 50mA
Output Configuration High Side
Output Current 9A
Voltage - Supply (Vcc/Vdd) Not Required
Max Supply Current 50mA
Input Type Non-Inverting
Switch Type General Purpose
Min Input Voltage 5.5V
Max Input Voltage 26V
Ratio - Input:Output 1:1
Voltage - Load 5.5V~26V
Driver Number of Bits 1
Fault Protection Open Load Detect, Over Temperature
Output Peak Current Limit-Nom 1.4A
Rds On (Typ) 180m Ω
Built-in Protections TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE
Radiation Hardening No
RoHS Status ROHS3 Compliant

VN06(012Y) Overview


The package is in the form of a Tube.The Pentawatt-5 (Straight Leads, Staggered Depth) package includes it.This lighting drivere has a mounting type of Through Hole.The switch type of this switch is General Purpose.To ensure reliable operation, the temperature should be set to -40°C~150°C TJ.The LED driver is equipped with 1 outputs.It uses a supply voltage of Not Required to operate.A maximum voltage of N-Channel volts is available from the output of this LED driver.As far as features are concerned, the LED driving board has Status Flag.I believe it belongs to the VN06 family.It contains 5 terminations.For operation, we use the 5 pins.As far as the lighting driver is concerned, there are 1 functions.This results in the maximum output current dropping to 9A to meet the operation criteria.Supply voltages of 13V allow for high efficiency.Through Hole is mounted in the way of this lighting driver.5 pins are equipped with it.The LED driver has 360mOhm resistance.When this is the case, the output current is set to 9A.Self-contained in an econtainer with a capacity of Peripheral Drivers, this LED driver is self-contained.In order to maximize efficiency, the supply voltage should be set to 26V.There is a maximum input voltage of 26V volts.There is a minimum input voltage of 5.5V volts.There is a maximum current requirement of 50mA for its operation.

VN06(012Y) Features


Supplied from 13V
Resistance of 360mOhm

VN06(012Y) Applications


There are a lot of STMicroelectronics VN06(012Y) Power Switches ICs applications.

  • Portable Devices
  • Portable Video Game Players
  • Gaming
  • Smart Phones, Feature Phones
  • USB Ports/Hubs
  • Hot Swaps
  • Hot-Swap Systems
  • Set-Top Boxes
  • USB Power Distribution
  • Portable/Handheld Devices

Write a review

Note: HTML is not translated!
    Bad           Good