VN06SP
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSO-10 Exposed Bottom Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Resistance | 180mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 27W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Base Part Number | VN06 |
| Pin Count | 10 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 9A |
| Operating Supply Voltage | 26V |
| Interface | On/Off |
| Nominal Supply Current | 15mA |
| Output Configuration | High Side |
| Power Dissipation | 27W |
| Output Current | 9A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 15mA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 5.5V |
| Max Input Voltage | 26V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~26V |
| Driver Number of Bits | 1 |
| Fault Protection | Open Load Detect, Over Temperature |
| Output Peak Current Limit-Nom | 1.4A |
| Rds On (Typ) | 180m Ω (Max) |
| Built-in Protections | TRANSIENT; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 3.75mm |
| Length | 9.4mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
VN06SP Overview
It is packaged in the form of a Tube.Package PowerSO-10 Exposed Bottom Pad contains it.This lighting drivere has a mounting type of Surface Mount.It owns the General Purpose switch type.To ensure reliable operation, the temperature should be set to -40°C~150°C TJ.The LED driver has 1 outputs.The LED driving board operates at Not Required volts.A maximum output voltage of N-Channel volts can be obtained with this LED driver.This LED driving board is equipped with Status Flag features in order for it to be useful.This object belongs to the VN06 family.It contains 10 terminations.In order to operate, 10 pins are used.It has 1 functions.In order to meet the operation criteria, the maximum output current drops to 9A.Supply voltages of 13V allow for high efficiency.Surface Mount is mounted in the way of this lighting driver.A total of 10 pins are included in this LED driver.180mOhm resistance is present in the lighting driver.This case results in a 9A output current.A self-contained econtainer holding Peripheral Drivers capacity contains this lighting driver.In order to achieve the best efficiency, the supply voltage should be set to 26V.As far as input voltage goes, its maximum is 26V volts.There is a minimum input voltage of 5.5V volts.It requires a maximum current requirement of 15mA.
VN06SP Features
Supplied from 13V
Resistance of 180mOhm
VN06SP Applications
There are a lot of STMicroelectronics VN06SP Power Switches ICs applications.
- Smartphone and PDA
- Mobile Communication Devices
- Portable Video Game Players
- Hot Swaps
- Hot-Swap Systems
- Notebook and Tablet Computers
- Portable GPS Device
- Telecom and Network Systems
- Various applications equipped with buttons
- Wireless Modem Data Cards
