banner_page

VN06SP-E

N-Channel PMIC VN06 10 Pin 13V PowerSO-10 Exposed Bottom Pad


  • Manufacturer: STMicroelectronics
  • Nocochips NO: 761-VN06SP-E
  • Package: PowerSO-10 Exposed Bottom Pad
  • Datasheet: PDF
  • Stock: 837
  • Description: N-Channel PMIC VN06 10 Pin 13V PowerSO-10 Exposed Bottom Pad (Kg)

Details

Tags

Parameters
Feature Status Flag
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 10
ECCN Code EAR99
Resistance 180mOhm
Terminal Finish Matte Tin (Sn) - annealed
Subcategory Peripheral Drivers
Max Power Dissipation 27W
Terminal Position DUAL
Terminal Form GULL WING
Number of Functions 1
Supply Voltage 13V
Current Rating 1.9A
Base Part Number VN06
Pin Count 10
Number of Outputs 1
Output Type N-Channel
Max Output Current 9A
Operating Supply Voltage 26V
Interface On/Off
Nominal Supply Current 15mA
Output Configuration High Side
Power Dissipation 27W
Output Current 9A
Voltage - Supply (Vcc/Vdd) Not Required
Max Supply Current 15mA
Input Type Non-Inverting
Switch Type General Purpose
Min Input Voltage 5.5V
Max Input Voltage 26V
Output Current per Channel 1.9A
Ratio - Input:Output 1:1
Voltage - Load 5.5V~26V
Driver Number of Bits 1
Fault Protection Open Load Detect, Over Temperature
Output Peak Current Limit-Nom 0.18A
Rds On (Typ) 180m Ω (Max)
Built-in Protections TRANSIENT; THERMAL; UNDER VOLTAGE
Height 3.65mm
Length 7.6mm
Width 9.5mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case PowerSO-10 Exposed Bottom Pad
Number of Pins 10
Operating Temperature -40°C~150°C TJ
Packaging Tube
JESD-609 Code e3

VN06SP-E Overview


The package is in the form of a Tube.It is included with the PowerSO-10 Exposed Bottom Pad package as well.This LED driving board is mounted using the mounting type Surface Mount.A General Purpose switch type is owned by it.In order to guarantee reliable performance, the temperature should be set to -40°C~150°C TJ.The LED driver has 1 outputs.With a supply voltage of Not Required, the LED driving board operates.A maximum voltage of N-Channel volts is available from the output of this LED driver.The lighting driver has Status Flag features.The VN06 family consists of this type.It consists of 10 terminations in total.The operation is carried out using the 10 pins.It has 1 functions.The maximum output current drops to 9A in order to meet the operation criteria.Using a voltage of 13V allows for high efficiency.As a result, it is mounted in the manner of Surface Mount.There are 10 pins in total on this board.Lighting drivers with 180mOhm resistance are used.As a result, the output current is set to 9A.Self-contained LED driver with Peripheral Drivers capacity in an econtainer.In order to maximize efficiency, the supply voltage should be set to 26V.A maximum input voltage of 26V volts can be applied to it.A voltage of 5.5V volts is the minimum input voltage.15mA is the maximum current required to operate it.

VN06SP-E Features


Supplied from 13V
Resistance of 180mOhm

VN06SP-E Applications


There are a lot of STMicroelectronics VN06SP-E Power Switches ICs applications.

  • Various applications equipped with buttons
  • USB Protection
  • PC Card Hot Swap
  • Storage (HDDs, SSDs)
  • Wireless Headsets
  • Wireless Modem Data Cards
  • Low Voltage I/O System Power
  • Hot Swaps
  • Smart Phones, Feature Phones
  • Hot-Swap Systems

Write a review

Note: HTML is not translated!
    Bad           Good