VN06SP13TR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSO-10 Exposed Bottom Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Resistance | 180mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 27W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Base Part Number | VN06 |
| Pin Count | 10 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 9A |
| Operating Supply Voltage | 26V |
| Interface | On/Off |
| Nominal Supply Current | 15mA |
| Output Configuration | High Side |
| Power Dissipation | 27W |
| Output Current | 9A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 15mA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 5.5V |
| Max Input Voltage | 26V |
| Output Current per Channel | 1.9A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~26V |
| Driver Number of Bits | 1 |
| Fault Protection | Open Load Detect, Over Temperature |
| Output Peak Current Limit-Nom | 1.4A |
| Rds On (Typ) | 180m Ω (Max) |
| Built-in Protections | TRANSIENT; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 3.75mm |
| Length | 9.4mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
VN06SP13TR Overview
Tape & Reel (TR) is the way it's packaged.In the PowerSO-10 Exposed Bottom Pad package, it is included.In this case, the LED driving board is mounted as Surface Mount.There is a switch type of General Purpose.It is best to set the temperature to -40°C~150°C TJ to ensure reliable operation.The LED driver has a total of 1 outputs.A voltage of Not Required is used to power it.It has a maximum output voltage of N-Channel volts.A lighting driver with Status Flag features is available.It is part of the VN06 family of LED drivers.A total of 10 terminations have been found in it.For operation, we use the 10 pins.As far as the lighting driver is concerned, there are 1 functions.This operation requires the maximum output current to be decreased to 9A.The supply voltage of 13V is conducive to high efficiency.The lighting driver is mounted in the direction of Surface Mount.A total of 10 pins are included in this LED driver.Currently, the LED driving board has 180mOhm resistance.This case has the output current set to 9A.Self-contained in an econtainer with a capacity of Peripheral Drivers, this LED driver is self-contained.It is recommended that the supply voltage be set at 26V in order to achieve maximum efficiency.As far as input voltage goes, its maximum is 26V volts.As far as input voltage goes, it has a minimum of 5.5V volts.For its operation, a maximum current requirement of 15mA is required.
VN06SP13TR Features
Supplied from 13V
Resistance of 180mOhm
VN06SP13TR Applications
There are a lot of STMicroelectronics VN06SP13TR Power Switches ICs applications.
- Portable Devices
- Storage Drives
- Portable/Handheld Devices
- USB Power Distribution
- Solid-State Drives
- Hot Swap
- HDD, SSD
- Wireless/Networking Cards
- PC Cards
- Solid State Drivers
