VN06SPTR-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSO-10 Exposed Bottom Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Resistance | 180mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 27W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Base Part Number | VN06 |
| Pin Count | 10 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 9A |
| Supply Voltage-Max (Vsup) | 26V |
| Supply Voltage-Min (Vsup) | 5.5V |
| Interface | On/Off |
| Nominal Supply Current | 15mA |
| Output Configuration | High Side |
| Power Dissipation | 27W |
| Output Current | 9A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Current per Channel | 1.9A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~26V |
| Driver Number of Bits | 1 |
| Fault Protection | Open Load Detect, Over Temperature |
| Output Peak Current Limit-Nom | 0.18A |
| Rds On (Typ) | 180m Ω (Max) |
| Built-in Protections | TRANSIENT; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 3.75mm |
| Length | 9.4mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
VN06SPTR-E Overview
Tape & Reel (TR) is the way it's packaged.It is included with the PowerSO-10 Exposed Bottom Pad package as well.The lighting driver is mounted in the Surface Mount position.There is a General Purpose switch type associated with it.To ensure reliable operation, set the temperature to -40°C~150°C TJ.The lighting driver has a total of 1 outputs that are available for use.With a supply voltage of Not Required, the LED driving board operates.The maximum output voltage of this LED driver is N-Channel volts.As far as features are concerned, the LED driving board has Status Flag.The VN06 family contains this object.It contains 10 terminations.In order to operate, 10 pins are used.It is important to note that the LED driving board has 1 functions.The maximum output current must drop to 9A to meet the operation criteria.With a supply voltage of 13V, high efficiency is possible.In this case, it is mounted in the way of Surface Mount.A total of 10 pins are included in this LED driver.In this LED driving board, there is 180mOhm resistance.When this case is used, the output current is set to 9A.A container with a capacity of Peripheral Drivers contains this self-contained lighting driver.The maximum supply voltage for this lighting driver is set to 26V (Vsup).For normal operation, the supply voltage (Vsup) should be kept above 5.5V.
VN06SPTR-E Features
Supplied from 13V
Resistance of 180mOhm
VN06SPTR-E Applications
There are a lot of STMicroelectronics VN06SPTR-E Power Switches ICs applications.
- PC Card Hot Swap
- Various applications equipped with buttons
- Storage (HDDs, SSDs)
- Portable Video Game Players
- Mobile Communication Devices
- HDD and SSD
- Smartphone and PDA
- USB Power Distribution
- Solid-State Drives
- Storage Drives
