VN16B
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | Pentawatt-5 (Vertical, Bent and Staggered Leads) |
| Number of Pins | 5 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Resistance | 38mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Power Dissipation | 82W |
| Terminal Position | ZIG-ZAG |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | VN16 |
| Pin Count | 5 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 20A |
| Operating Supply Voltage | 26V |
| Interface | On/Off |
| Nominal Supply Current | 25μA |
| Output Configuration | High Side |
| Power Dissipation | 82W |
| Output Current | 20A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 50mA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 6V |
| Max Input Voltage | 26V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 6V~26V |
| Fault Protection | Open Load Detect, Over Temperature |
| Rds On (Typ) | 60m Ω (Max) |
| Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
| RoHS Status | ROHS3 Compliant |
VN16B Overview
Tube is the way it's packaged.This package is included in Pentawatt-5 (Vertical, Bent and Staggered Leads).The LED driver is mounted as Through Hole.A General Purpose switch type is owned by it.The temperature should be set to -40°C~150°C TJ to ensure reliable functioning.The lighting driver is equipped with 1 outputs that can be used.With a supply voltage of Not Required, the LED driving board operates.It has a maximum output voltage of N-Channel volts.The lighting driver has Status Flag features.It belongs to the family VN16.It consists of 5 terminations in total.For operation, we use the 5 pins.There are 1 functions of the LED driver.The maximum output current is reduced to 20A to meet the operation criteria.It is possible to achieve a high level of efficiency with a supply voltage of 13V.The lighting driver is mounted in the direction of Through Hole.5 pins are connected to it in total.Currently, the LED driving board has 38mOhm resistance.When this is the case, the output current is set to 20A.It is recommended to set the supply voltage to 26V for optimum efficiency.The maximum input voltage is 26V volts.The input voltage minimum is 6V volts.It has a maximum current requirement of 50mA.
VN16B Features
Supplied from 13V
Resistance of 38mOhm
VN16B Applications
There are a lot of STMicroelectronics VN16B Power Switches ICs applications.
- Notebook PC
- Portable GPS Device
- USB3.1 Power Delivery
- Hot-Swap Systems
- Portable Video Game Players
- USB Protection
- Smartphone and PDA
- Hard Disk Drives
- Set-Top Boxes
- Solid-State Drives
