VN16B(011Y)
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | Pentawatt-5 (Horizontal, Bent and Staggered Leads) |
| Number of Pins | 5 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Resistance | 60mOhm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 82W |
| Terminal Position | ZIG-ZAG |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | VN16 |
| Pin Count | 5 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 20A |
| Operating Supply Voltage | 26V |
| Interface | On/Off |
| Nominal Supply Current | 25μA |
| Output Configuration | High Side |
| Power Dissipation | 82W |
| Output Current | 20A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 50mA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 6V |
| Max Input Voltage | 26V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 6V~26V |
| Driver Number of Bits | 1 |
| Fault Protection | Open Load Detect, Over Temperature |
| Rds On (Typ) | 60m Ω (Max) |
| Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
| RoHS Status | ROHS3 Compliant |
VN16B(011Y) Overview
It's?packaged?in?the way?of?a?Tube.Package Pentawatt-5 (Horizontal, Bent and Staggered Leads) contains it.Through Hole is the mounting type of the LED driver.There is a General Purpose switch type associated with it.To ensure reliable operation, set the temperature to -40°C~150°C TJ.By default, it is set to output 1.The LED driving board operates with a supply voltage of Not Required.A maximum output voltage of N-Channel volts can be achieved by this LED driver.Status Flag features are available on the lighting driver.I believe it belongs to the VN16 family.It consists of 5 terminations in total.5 pins are used for operation.There are 1 functions of the LED driver.This results in the maximum output current dropping to 20A to meet the operation criteria.Supply voltages of 13V allow for high efficiency.As a result, it is mounted in the manner of Through Hole.In total, it has 5 pins.60mOhm is the resistance of the lighting driver.It is set to 20A in this case.A self-contained LED driver with a capacity of Peripheral Drivers is contained in an econtainer.For maximum efficiency, the supply voltage should be set to 26V.Voltage input is limited to 26V volts.A minimum input voltage of 6V volts is required for this LED driver.50mA is the maximum current required to operate it.
VN16B(011Y) Features
Supplied from 13V
Resistance of 60mOhm
VN16B(011Y) Applications
There are a lot of STMicroelectronics VN16B(011Y) Power Switches ICs applications.
- HDD and SSD
- USB Power Distribution
- Notebook and Tablet Computers
- Storage Drives
- Portable Devices
- Portable Music Players
- Solid-State Drives
- Wireless Headsets
- Portable GPS
- Hot Swaps
