VN16BSP
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSO-10 Exposed Bottom Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Feature | Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Resistance | 38mOhm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Power Dissipation | 82W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | VN16 |
| Pin Count | 10 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 20A |
| Operating Supply Voltage | 26V |
| Interface | On/Off |
| Nominal Supply Current | 25μA |
| Output Configuration | High Side |
| Power Dissipation | 82W |
| Output Current | 20A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 50mA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 6V |
| Max Input Voltage | 26V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 6V~26V |
| Fault Protection | Open Load Detect, Over Temperature |
| Turn On Time | 500 μs |
| Output Peak Current Limit-Nom | 20A |
| Rds On (Typ) | 60m Ω (Max) |
| Turn Off Time | 500 μs |
| Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 3.75mm |
| Length | 9.4mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
VN16BSP Overview
It is packaged in the form of a Tube.This package is included in PowerSO-10 Exposed Bottom Pad.The lighting driver has the mounting type Surface Mount.There is a switch type of General Purpose.The temperature should be set to -40°C~150°C TJ to ensure reliable functioning.The LED driver is equipped with 1 outputs.Operation is based on Not Required supply voltage.A maximum voltage of N-Channel volts is available from the output of this LED driver.The lighting driver has Status Flag features.It belongs to the family VN16.The termination count is 10.It is necessary to use the 10 pins in order to operate the LED driver.There are 1 functions of the LED driver.The maximum output current drops to 20A in order to meet the operation criteria.Using a voltage of 13V allows for high efficiency.It is mounted in the way of Surface Mount.10 pins are connected to it in total.The LED driver has 38mOhm resistance.The output current is set to 20A in this case.In order to maximize efficiency, the supply voltage should be set at 26V.The maximum input voltage is 26V volts.A minimum input voltage of 6V volts is required for this LED driver.For its operation, a maximum current requirement of 50mA is required.
VN16BSP Features
Supplied from 13V
Resistance of 38mOhm
VN16BSP Applications
There are a lot of STMicroelectronics VN16BSP Power Switches ICs applications.
- Storage Drives
- Portable GPS Device
- PC Cards
- PC Card Hot Swap
- Gaming
- Mobile Communication Devices
- Portable/Handheld Devices
- Portable Video Game Players
- Portable Music Players
- Wireless Modem Data Cards
