VN16BSP-E
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Number of Pins | 10 |
| Published | 2004 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Resistance | 38mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Current Rating | 20A |
| Number of Outputs | 1 |
| Max Output Current | 20A |
| Supply Voltage-Max (Vsup) | 26V |
| Temperature Grade | AUTOMOTIVE |
| Supply Voltage-Min (Vsup) | 6V |
| Power Dissipation-Max | 82W |
| Nominal Supply Current | 25μA |
| Power Dissipation | 82W |
| Current - Output | 20A |
| Output Current per Channel | 5.6A |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Driver Number of Bits | 1 |
| Turn On Time | 500 µs |
| Turn Off Time | 500 µs |
| Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 3.75mm |
| Length | 9.4mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
VN16BSP-E Overview
The terminations total 10.In this case, the device is located at terminal DUAL.High efficiency is possible at a voltage of 13V.For operation, 10 pins are used.Peripheral Drivers contains this gadget all by itself.There is a Surface Mount axis pointing in the direction of the object.Operating at 150°C°C allows for stable operation.For reliability, it must work at a minimum temperature of -40°C degrees Celsius.Normally, Vsup should remain above 6V.Vsup (maximum supply voltage) is set to 26V.The default setting is output 1.Hot Swap is necessary to reduce the maximum output current to 20A in order to meet the operation crHot Swaperia.Hot Swap has 38mOhm resistance.
VN16BSP-E Features
VN16BSP-E Applications
There are a lot of STMicroelectronics VN16BSP-E hot swap controllers applications.
- Undervoltage protection
- Central office switching systems
- Continuous monitoring of device temperature
- Hard drive
- Industrial
- Solid state circuit breakers
- Network switch
- Networking
- Redundant-array-of-independent-disk (RAID) storage
- Automatic restart after load failure
